Panasonic PT-ST10U Complete the detailed settings and click Next, Click Submit, Adjust clock

Page 13

Complete the detailed settings and click [Next].

When [Next] is clicked, the next page appears, enabling you to complete the detailed settings as desired.

After all required items have been entered, a confirmation window appears.

The settings will be registered.

If you have changed the LAN settings that are currently in use, the connection may break off.

Click [Detailed set up] → [Adjust clock] in the menu.

Time zone : Select the time zone and click [Set time zone].

Time : Enter the current date and time in [Date] and [Time], and then click [Set date and time].

Image 13

Contents PT-ST10EA PT-ST10U Contents What you can do Request Regarding SecurityWEB control See PJLink SeeCheck your computer Connecting with Wired LANNecessary environment for computers to be connected Turn on the computerPress the Menu button on the projector Network setting of the projectorSelect Network with the buttons Press the Enter buttonDefault network settings Wired LAN settingsMenu’s Operating guidance Select OK with the buttons and press the Enter buttonSelect on or OFF with the buttons Select Network Control in the Network menuMAC Address Network DhcpBefore using the WEB control Using WebBrowser„„Proxy server settings Enter the User name and the Password Click OK Level and check the Enable checkbox under Active scriptingWebBrowser starts up and the authentication window appears Open Internet Properties window„ Network status Monitor information window„ If Failed appears DescriptionProjector control window Detailed set up window„„Adjust clock Complete the detailed settings and click NextClick Submit „„Ping test „„E-mail set up„„If Simple is selected under Mail Contents „„If Normal is selected under Mail ContentsSwitching Languages Change password window„„Authentication set up „„Command port set up„„PJLink security authentication Using PJLink protocolCommand Control details Trademarks Glossaryヱㄏㄔㄐㄏㄊチヤㄐㄓㄑㄐㄓㄕㄊㄐㄏ