Panasonic PT-ST10E manual Request Regarding Security, What you can do, WEB control See, PJLink See

Page 3

Request Regarding Security

When using this product, security breaches of the type described below are conceivable.

•• Leakage of your private information via this product

•• Illegal operation of this product by a malicious third-party

•• Harm to or cessation of operation of this product by a malicious third-party

Be sure to implement sufficient security measures.

•• Set passwords, and limit the users that are permitted login access.

•• Make sure the password is as hard to guess as possible.

•• Change the password periodically.

•• Panasonic Corporation and its affiliated companies never directly ask customers for their password.

Do not give out your password even if directly asked by a third-party representing themselves as Panasonic Corporation.

•• Always use on a network that has safety protection such as a firewall implemented.

What you can do

<WEB control> (See page 9)

The following operations are possible when using WebBrowser.

•• Setting and adjusting the projector

•• Displaying the projector status

•• Setting for message transmission

<PJLink> (See page 17)

Compatible with PJLink Class 1. The following operations can be performed from a computer when PJLink protocol is used.

•• Setting the projector

•• Querying the projector status

<Command control> (Refer to “SERIAL TERMINAL” in “Technical Information” of the Basic Manual.) You can control the projector from a computer, using the control commands of the serial terminals.

If you use “WEB control”, “PJLink” or “Command control”, turn [ON] the [NETWORK CONTROL] in the NETWORK menu for the projector. (See page 7)

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents PT-ST10EA PT-ST10U Contents PJLink See Request Regarding SecurityWhat you can do WEB control SeeTurn on the computer Connecting with Wired LANCheck your computer Necessary environment for computers to be connectedPress the Enter button Network setting of the projectorPress the Menu button on the projector Select Network with the buttonsSelect OK with the buttons and press the Enter button Wired LAN settingsDefault network settings Menu’s Operating guidanceSelect on or OFF with the buttons Select Network Control in the Network menuMAC Address Network DhcpUsing WebBrowser Before using the WEB control„„Proxy server settings Open Internet Properties window Level and check the Enable checkbox under Active scriptingEnter the User name and the Password Click OK WebBrowser starts up and the authentication window appearsDescription Monitor information window„ Network status „ If Failed appearsProjector control window Detailed set up windowComplete the detailed settings and click Next „„Adjust clockClick Submit „„Ping test „„E-mail set up„„If Simple is selected under Mail Contents „„If Normal is selected under Mail Contents„„Command port set up Change password windowSwitching Languages „„Authentication set upUsing PJLink protocol „„PJLink security authenticationCommand Control details Trademarks Glossaryヱㄏㄔㄐㄏㄊチヤㄐㄓㄑㄐㄓㄕㄊㄐㄏ
Top Page Image Contents