Panasonic PT-ST10EA, TQBH0228, PT-ST10U manual „„E-mail set up, „„Ping test

Page 14

Using WebBrowser (cont.)

„„E-mail set up

You can specify two email recipients.

Click [Detailed set up] → [E-mail set up] in the menu.

•• [MAIL SERVER]

ENABLE :Enable or disable email transmission.

SMTP SERVER NAME : Enter the SMTP server name.

•• [MAIL OPTION]

 

MAIL FROM :

Enter the sender’s email address.

MEMO :

Enter a description of the sender.

•• [TEMPERATURE WARNING SET UP]

MINIMUM TIME : Enter the interval for sending email.

INPUT AIR TEMPERATURE :Select the temperature of the intake sensor at which to send a warning message.

•• [E-MAIL ADDRESS]

E-MAIL ADDRESS : Enter the email addresses of the recipients.

MAIL CONTENTS : Change the type of message as desired.

When sending messages to mobile phones, select “SIMPLE”.

ERROR :Select ON to send email when errors occur.

LAMP RUNTIME : Select ON to send email when “at REMAIN” is reached.

INPUT AIR TEMPERATURE :Select ON to send email when the temperature set in [TEMPERATURE WARNING SET UP] is exceeded.

PERIODIC REPORT : Send a message with the projector status at the selected date and time. When [submit] is clicked, the settings are applied.

Consult your system administrator on MAIL SERVER and E-MAIL ADDRESS settings.

„„Ping test

You can confirm if a network connection is established with Mail server,

POP server, DNS server or the like.

Click [Detailed set up] → [Ping test] in the menu.

Input IP address : Enter the IP address of the server you want to test, and then click [Submit].

If succeeded in connection, the following display appears.

If failed in connection, the following display appears.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents PT-ST10EA PT-ST10U Contents WEB control See Request Regarding SecurityWhat you can do PJLink SeeNecessary environment for computers to be connected Connecting with Wired LANCheck your computer Turn on the computerSelect Network with the buttons Network setting of the projectorPress the Menu button on the projector Press the Enter buttonMenu’s Operating guidance Wired LAN settingsDefault network settings Select OK with the buttons and press the Enter buttonSelect Network Control in the Network menu Select on or OFF with the buttonsNetwork Dhcp MAC Address„„Proxy server settings Using WebBrowserBefore using the WEB control WebBrowser starts up and the authentication window appears Level and check the Enable checkbox under Active scriptingEnter the User name and the Password Click OK Open Internet Properties window„ If Failed appears Monitor information window„ Network status DescriptionDetailed set up window Projector control windowClick Submit Complete the detailed settings and click Next„„Adjust clock „„E-mail set up „„Ping test„„If Normal is selected under Mail Contents „„If Simple is selected under Mail Contents„„Authentication set up Change password windowSwitching Languages „„Command port set upCommand Control details Using PJLink protocol„„PJLink security authentication Glossary Trademarksヱㄏㄔㄐㄏㄊチヤㄐㄓㄑㄐㄓㄕㄊㄐㄏ
Top Page Image Contents