Panasonic TQBH0228, PT-ST10U Check your computer, Connecting with Wired LAN, Turn on the computer

Page 4

Make the network setting according to your system administrator.

If the projector settings are the default settings (See page 6), the computer can be used with the following network settings.

Check your computer

Necessary environment for computers to be connected

•• First, check your computer to see whether or not it has a wired LAN function.

LAN : “Glossary” (See page 18)

•• Before connecting the computer to the projector, be sure to check the following settings.

Check 1  For LAN cable

•• Is the cable properly connected?

•• Use LAN cable that is compatible with category 5 or above.

Check 2  Wired LAN settings

<Computer with a built-in wired LAN function>

•• Is your wired LAN switched on?

<Computer without a built-in wired LAN function>

•• Is your wired LAN adapter properly recognized?

•• Is your wired LAN adapter switched on?

•• Install the wired LAN adapter driver beforehand.

For details on how to install the driver, refer to the instructions accompanying the wired LAN adapter.

Check 3  For WebBrowser

•• WebBrowser is necessary to use WEB control.

•• Compatible WebBrowser : Internet Explorer 6.0/7.0/8.0

Do not touch the LAN terminal or the metal part of the LAN cable, the static electricity may discharge from our hand (body) causing a malfunction.

Connecting with Wired LAN

Connection can be made with wired LAN. However, confirm to your system administrator on network settings before changing any settings.

11 Turn on the computer.

22

IP ADDRESS	192.168.10.101
SUBNETMASK	255.255.255.0
DEFAULT GATEWAY	192.168.10.1

4

Image 4

Contents PT-ST10EA PT-ST10U Contents Request Regarding Security What you can doWEB control See PJLink SeeConnecting with Wired LAN Check your computerNecessary environment for computers to be connected Turn on the computerNetwork setting of the projector Press the Menu button on the projectorSelect Network with the buttons Press the Enter buttonWired LAN settings Default network settingsMenu’s Operating guidance Select OK with the buttons and press the Enter buttonSelect Network Control in the Network menu Select on or OFF with the buttonsNetwork Dhcp MAC AddressBefore using the WEB control Using WebBrowser„„Proxy server settings Level and check the Enable checkbox under Active scripting Enter the User name and the Password Click OKWebBrowser starts up and the authentication window appears Open Internet Properties windowMonitor information window „ Network status„ If Failed appears DescriptionDetailed set up window Projector control window„„Adjust clock Complete the detailed settings and click NextClick Submit „„E-mail set up „„Ping test„„If Normal is selected under Mail Contents „„If Simple is selected under Mail ContentsChange password window Switching Languages„„Authentication set up „„Command port set up„„PJLink security authentication Using PJLink protocolCommand Control details Glossary Trademarksヱㄏㄔㄐㄏㄊチヤㄐㄓㄑㄐㄓㄕㄊㄐㄏ