Setting up
Mains lead
Connecting | Disconnecting |
Getting Started
1.Make sure the shape of the mains plug and the AC IN terminal on the back of the projector match, then push the plug all the way in.
2.Align the side of the “power cord secure lock” with the side guide rail of the AC IN terminal of the projector and slide it in.
Rail guide
3.Place the latch to the latch catcher and press until it clicks.
Latch 
4. Connect the mains lead to a mains socket.
NOTE:
1.Unplug the mains lead from the mains socket.
2.Depress the latch and slide the cover off.
Latch 
3.Slide the “power cord secure lock” up along the side guide rail and remove.
Rail guide
4.Hold the plug and unplug the mains lead from the AC IN terminal on the back of the projector.
Power indicator lights in orange if the internal cooling fan is still operating by internal power supply.
•Do not use other than the provided mains lead.
•Ensure all the input devices are connected and turned off before connecting the mains lead.
•Do not force the connector as this may damage the projector and/or the mains lead.
•Dirt or dust
•Switch off the power to the projector when not in use.
•If the projector is switched on again while the internal cooling fan is still operating by the internal power supply, it may take a while to start the projection.