Panasonic PT-DW6300K, D6KE manual Switching the input signal, Stopping the projection

Remote control operation

Switching the input signal

You can use the remote control to switch the signals that are being input and projected.

RGB1	Switches to RGB 1 IN.
RGB2	Switches to RGB 2 IN.
DVI-D	Switches to DVI-D IN.
VIDEO	Switches to VIDEO IN.
S-VIDEO	Switches to S-VIDEO IN.
SDI*1	Switches to SDI IN.

*1. SDI is only for PT-DZ6710E.

Basic Operation

Stopping the projection

If the projector is not used for a certain period of time during the meeting intermission, for example, a shutter mode is available that allows the user to hide images temporarily.

Press the SHUTTER button to block the projected light by the internal shutter, and press again to resume.

Clearing the on-screen menu

Press the ON SCREEN button to clear the on-screen menus to avoid disrupting the program.

Press the ON SCREEN button again to displays

Changing the picture aspect ratio

You can toggle through an appropriate set of aspect ratios for a given input signal. The setting will change each time the ASPECT button is pressed.

Appearance sample

S-VIDEO signal

VID AUTO H S1 AUTO H VID AUTO(PRI.) H THROUGH H 16:9 H 4:3 H H-FIT H V-FIT H HV-FIT H VID AUTO

NOTE:

•The appearance of setting options vary according to input signals. See ASPECT in POSITION menu of the functional instructions that is in the provided CD-ROM.

Displaying the internal test pattern

The projector has 7 types of internal test patterns to check the condition of the set.

1.Display an input signal image.

2.Press the TEST PATTERN button.

3.Press I H to select the required test pattern.

NOTE:

• See TEST PATTERN menu of the functional instructions that is in the provided CD-ROM.

ENGLISH - 22