Monitor Lamp indicators
FILTER indicator
The FILTER indicates the Auto Cleaning Filter (ACF) unit status.
Lamp | Information |
| Check point |
| Remedial measure |
indication |
|
| |||
|
|
|
|
| |
|
| • | Check the REMAINING FILTER | • | Replace the ACF unit. |
Lighting in red | The ACF unit has run out. |
| of STATUS in PROJECTOR |
|
|
|
|
| SETUP menu. |
|
|
Blinking in red | The ACF unit is not | • | Check the ACF unit | • | Replace the ACF unit. |
installed.*1 |
| compartment. |
|
| |
|
|
|
| ||
| The ACF unit remains | • | Check the REMAINING FILTER | • | Request the dealer to purchase the new |
Lighting in | few. The remaining use |
| of STATUS in PROJECTOR |
| ACF unit. |
time of the ACF unit is |
| SETUP menu. |
|
| |
orange |
|
|
| ||
approximately |
|
|
|
| |
|
|
|
|
| |
| 200 hours.*2 |
|
|
|
|
|
| • | Is foreign object blocking the | • | Remove the foreign object from the ACF |
Blinking in | The ACF unit cannot |
| ACF unit operation? |
| unit. |
orange | operate properly. |
|
| • When the foreign object still remained, | |
|
|
|
|
| contact the dealer. |
*1. When the ACF unit is not installed, the filter indicator will blink in red and the power will turn off.
*2. 200 hours is the roughly guided time.
NOTE:
•When the FILTER indicator is flashing green, the Auto Cleaning Filter (ACF) is normally rolling up.
•When the ACF unit is operating, operational sound may be heard.
•In a dusty environment, the guided remaining use time will be shorter. Contact the dealer to purchase the new ACF unit earlier.
•If using the projector at high elevations 1 400 - 2 700 m (4 593 - 8 858 ft) sea level and HIGH ALTITUDE MODE in PROJECTOR SETUP menu is OFF, it may cause malfunction of the ACF unit.
•Before the FILTER indicator blinks in orange when operational malfunction, mechanical sound of the clutch may be heard.
Maintenance