Panasonic D6KE, PT-DW6300K manual  Display dots of each model, PT-DZ6710E, PT-DZ6700E, PT-DW6300E

							Technical Information
	Display	Scanning		Dot clock				PnP*3
		frequency		frequency	Picture
Mode	resolution									Format*4
					quality*2			DVI-D	DVI-D
	(dots)*1	H (kHz)	V (Hz)	(MHz)		RGB2
								EIDI1	EIDI2
WSXGA+	1 680 x 1 050	65.3	60.0	146.3	A
1 920 x 1 080*9	1 920 x 1 080	66.6	59.9	138.5	AA*5					D/R
WUXGA*9	1 920 x 1 200	74.0	60.0	154.0	AA*8	D			D

*1. The “i” appearing after the resolution indicates an interlaced signal. Flicker (line flicker) may be caused in images if interlace is con- nected.

*2. The following symbols are used to indicate picture quality.

AA Maximum picture quality can be obtained.

ASignals are converted by the image processing circuit before picture is projected.

BSome loss of data occurs to make projection easier.

*3. Where marked “D” signals indicates in Plug and Play is compatible with EDID of projector.

Unmarked signals in Plug and Play may also be compliant if input terminals are written in the format list. Where Plug and Play is unmarked and nothing is written in the format list, difficulties in projecting image may occur even when computer and projector appear to have same resolution.

*4. The following symbols are used to indicate the format.

V= VIDEO, S = S-VIDEO, D = DVI, R = RGB, Y = YPBPR SDI is only for the PT-DZ6710E.

*5. PT-DW6300E/PT-D6000E/PT-D5000E: A

*6. PT-DZ6710E/PT-DZ6700E/PT-D6000E/PT-D5000E: A

*7. PT-DZ6710E/PT-DZ6700E/PT-DW6300E: A

*8. PT-DW6300E/PT-D6000E/PT-D5000E: B

*9. VESA CVT-RB (Reduced Blanking) compatible.

NOTE:

•Projecting an interlaced signal may cause flicker in screen.

Display dots of each model

PT-DZ6710E	1 920 x 1 200
PT-DZ6700E	1 920 x 1 200
PT-DW6300E	1 280 x 800
PT-D6000E/PT-D5000E	1 024 x 768

Appendix

ENGLISH - 35