Panasonic PT-D5600UL, PT-DW5000U manual Connection, Setup precautions

Page 21

Connection

Setup precautions

•Before connecting any of your video/audio equipment to the projector, carefully read the owners manual supplied with the equipment once again.

•All cable connections should be made with the entire system devices, including the projector, first turned off.

•Obtain commercial interconnecting cables for devices supplied with no accessory or optional interconnect cables.

•Video signals containing too much jitter may cause the images on the screen to randomly wobble or shake. Inserting a time base corrector (TBC) in the projector’s video line will relieve this problem.

•The projector only accepts composite-video, S-video, analog-RGB (with TTL sync. level), and digital signal.

•Some PC models are not compatible with PT-D5600U/PT-D5600UL/PT-DW5000U/PT-DW5000UL projectors.

•The pin assignments on the S-VIDEO IN terminal are as follows:

Pin No.

Signal

Ground (luminance)

Ground (colour)

Luminance signal

Colour signal

Viewed from mating side

•The pin assignments on the RGB2 input terminal are as follows:

Pin No.

Signal

 

R/PR

 

G/G · SYNC/Y

 

B/PB

 

HD/SYNC

 

VD

Viewed from mating side

•The pin assignments on the DVI-D input terminal are as follows (interface with DVI-D output terminal on PC):

Viewed from mating side

Pin No.

Signal

Pin No.

Signal

 

T. M. D. S data 2-

 

 

 

T. M. D. S data 2+

 

+5 V

 

T. M. D. S data 2

 

Ground

 

shield

 

Hot plug sense

 

 

 

T. M. D. S data 0-

 

 

 

T. M. D. S data 0+

 

DDC clock

 

T. M. D. S data 0

 

DDC data

 

shield

 

T. M. D. S data 1-

 

 

 

T. M. D. S data 1+

 

T. M. D. S clock

 

T. M. D. S data 1

 

shield

 

shield

 

T. M. D. S clock+

 

 

 

T. M. D. S clock-

Pin : Not used.

Pins - , and : Ground.

•The DVI-D input terminal supports single link only.

•EDID settings should be performed to suit the DVI equipment being connected. (Page 34)

•The DVI-D input terminal can be used to connect to a DVI equipment, but note that images may not appear or the projector may not work properly when connected to certain DVI equipment.

•This projector supports HDCP.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Commercial Use PT-DW5000ULModel number PT-D5600U/PT-D5600UL/PT-DW5000U/PT-DW5000UL Dear Panasonic CustomerPT-D5600U/PT-D5600UL/PT-DW5000U/PT-DW5000UL Contents Precautions with regard to safety Do not place liquid containers on top of the projector Do not insert any foreign objects into the projectorAlways disconnect all cables before moving the projector Use only the Specified battery AccessoriesDo not look into the lens while the projector is being used Do not use the old lamp unitPrecautions on handling Name and function of parts Set to Computer When the operation mode selectorStatus LED lights Front and side of the projectorRear view of the main unit Controls on rear panel Side-mounted connection terminals Using the remote control unit Effective range of remote control operationLoading dry cells Setting projector ID number to remote control Using the remote control as a PC mouseOperation mode selector switch Using a wired remote control InstallationInstallation geometry Projection schemesPT-D5600U, PT-D5600UL Projection distance by projection lensInstallation 817 PT-DW5000U, PT-DW5000ULCalculation formulas for projection distance by lens types Connection Setup precautionsExample of connecting with PCs Example of connecting with AV productsPowering up the projector Making adjustment and selectionProjection Direct power off function Powering off the projectorHow to remove the projection lens How to adjust the lensHow to adjust the lens position to the left or right Choose an item and adjust it using buttonsUsing the Freeze function Automatic adjustment Auto SetupUsing the Shutter function Using the digital zoom D.ZOOM + functionStructure of menu screens On-screen menusResetting to the factory default Menu items settingBasic menu operations Returning to the previousAdjusting the picture TV-SYSTEM Adjusting the positionSystem PositionClock Phase ZoomKeystone Input Resolution How to use Advanced MenuDigital Cinema Reality BlankingXGA Mode Sxga ModeRaster Position OPTION1 settings Lamp Power OPTION2 settingsFRONT/REAR DESK/CEILINGFAN CONTROL2 PasswordSystem Information FAN CONTROL1Setting the security Connecting the PC Setting the networkSystem requirements Connection examplePin assignments and signal names Using the serial terminalsCommunication conditions Factory setting Examples of connectionCable specifications Control commandsConnecting to a PC Computer Projector DTE specifications Pin assignments and controlIndication of lamp monitor Procedure of cleaning Cleaning and replacement of air filterClean the air filter Dismantle the air filterReplacing the lamp unit Timing of lamp unit replacementRemove the two screws securing the fan unit Lamp unit replacement stepsLamp unit will be hot after it has been used Have a Phillips screwdriver ready ahead of timeSelect the lamp which has been replaced with the and buttons Accessing from the Web browser Using Web Browser ControlPassword change Click OKPower On/Off control Shutter control Mail set up buttonChange password button Basic controlError information Monitor informationOK Normal operation Failed Occurrence of trouble When Failed has appeared for an item Parameter Description Mail setupError Mail setup page ContinuingPOP server setup DNS server set upButton to update settings Ping testAdjust clock Contents of mail sentNetwork status Network configSupported commands Using the PJLink protocolPJLink security authentication Command Control Description RemarksPower does Symptoms ChecksRemote control Not turn onPT-D5600U PT-D5600UL PT-DW5000U SpecificationsOutside dimensions Length of power supply cord CabinetRemote control Power source Wireless mouse receiverPAL-M/PAL60 PAL/PAL-N/SECAM Compatible Signal ListDimensions Installation dimensions diagramTrademark Acknowledgement Concernant LA Sécurité Ne pas couvrir le filtre et la sortie d’air Précautions concernant la sécuritéNe pas surcharger la prise de courant Ne pas retirer le couvercle ou le modifierNe pas placer le projecteur sur des surfaces instables Ne pas placer des récipients de liquide sur le projecteurNe pas mettre d’objets étrangers dans le projecteur Ne pas placer d’objets lourds sur le projecteur ’utiliser que la pile indiquée’utilisez pas un bloc lampe usagé Précautions pour la manipulation Nettoyage et maintenancePrécautions pour le transport Mise au rebutPériode de remplacement de la lampe Remplacement de la lampeProcédure de remplacement de la lampe La lampe est chaude si elle vient d’être utiliséePréparez un tournevis Phillips à l’avance INIT. Compt Panasonic Projector Systems Company Technical SupportPanasonic Canada Inc

PT-DW5000U, PT-D5600U, PT-D5600UL specifications

The Panasonic PT-D5600UL, PT-D5600U, and PT-DW5000U projectors are designed for professional use in a variety of environments, ranging from corporate settings to educational institutions and large venues. These projectors are renowned for their exceptional image quality, versatile features, and robust performance.

At the heart of these projectors is the high-performance DLP technology, which offers remarkable brightness and contrast. The PT-D5600UL and PT-D5600U offer a brightness level of 6000 lumens, while the PT-DW5000U provides 5000 lumens, ensuring clear visibility even in well-lit rooms. This remarkable brightness coupled with a solid contrast ratio provides sharp and vivid images, whether for video presentations or intricate graphics.

The three models are equipped with a versatile lens system, which includes various optional lenses to accommodate different installation requirements. The lens shift feature enhances installation flexibility, allowing for simple adjustments to the image without distortion. The projectors support various resolutions and aspect ratios, including WUXGA (1920 x 1200) for the PT-D5600UL and PT-D5600U, and WXGA (1280 x 800) for the PT-DW5000U, ensuring that users can display content with high precision and clarity.

Panasonic’s innovative Daylight View technology enhances image quality by automatically adjusting color reproduction to match ambient lighting conditions, ensuring that images remain visible and consistent throughout the day. Furthermore, these projectors employ a durable lamp life of up to 3000 hours in normal mode, reducing maintenance needs and costs for users.

For enhanced connectivity, the PT-D5600UL, PT-D5600U, and PT-DW5000U are equipped with multiple input options, including HDMI, DVI-D, and VGA ports, supporting a range of multimedia devices. The projectors also support network monitoring and control via LAN, allowing users to manage settings and monitor performance remotely.

In terms of build quality, these projectors are designed for reliability and longevity. Their robust chassis and advanced cooling system ensure stable operation even during extended use, making them ideal for events or long presentations. Overall, the Panasonic PT-D5600UL, PT-D5600U, and PT-DW5000U projectors deliver a seamless and high-quality projection experience, solidifying Panasonic’s reputation as a leader in the projection technology market.
Top Page Image Contents