Panasonic PT-DW5000U manual Mail setup, When Failed has appeared for an item Parameter Description

Page 49

When [FAILED] has appeared for an item

Parameter

Description

 

 

MAIN CPU BUS

Trouble has occurred in the microcomputer circuitry. Consult your dealer.

FAN

Trouble has occurred in the fan or its drive circuit. Consult your dealer.

OPTICS MODULE

The temperature inside the projector is high. It may be that the projector is

TEMPERATURE

being used where the ambient temperature is high such as near a heating

 

appliance.

INPUT AIR TEMPERATURE

The input air temperature is too high. It may be that the projector is being

 

used where the ambient temperature is high such as near a heating

 

appliance.

AROUND LAMP

The temperature near the lamp has risen very high.

TEMPERATURE

Something may be blocking the exhaust vent.

LAMP REMAIN TIME

The lamp runtime has exceeded the prescribed cumulative time, and it is

 

now time to replace the lamp.

LAMP STATUS

The lamp has failed to light.

 

Wait a short while for the lamp to cool off, and then turn on the power.

SHUTTER

Trouble has occurred in the shutter circuitry. Consult your dealer.

AIR FILTER

Too much dust accumulates on the air filter.

 

Turn off the MAIN POWER switch using the procedure on page 24 and

 

clean the air filter (refer to page 42).

OPTICS MODULE TEMP.SENSOR

Trouble has occurred in the temperature detection sensor inside the

 

projector. Consult your dealer.

INPUT AIR TEMP.SENSOR

Trouble has occurred in the sensor used to detect the input air temperature.

 

Consult your dealer.

AROUND LAMP

Trouble has occurred in the temperature detection sensor around lamps.

TEMP. SENSOR

Consult your dealer.

BATTERY

The backup battery has been run out. Consult your dealer.

AIRFLOW SENSOR

Trouble has occurred in the air volume sensor. Consult your dealer.

COLOR WHEEL

Trouble has occurred in the color wheel or the color wheel drive circuit.

 

Consult your dealer.

 

 

E-mail setup page

With this projector, if a problem occurs or if the lamp usage time reaches a set value, an e-mail message can be sent to one or more preset e-mail addresses (maximum two addresses). Click [Projector Control], then [E-mail set up] to display the E-mail setup page.

The user can modify the threshold temperature for sending temperature warning mail. If the temperature rises above the set value, control sends temperature warning mail.

Select “Enable” to use the E-mail function.

Enter the IP address or server name of the E-mail server (SMTP). The DNS server must be set if the server name is entered.

Enter the E-mail address of the projector. (maximum 63 characters)

The user can enter the location of, for example, the installed projector so that the recipient may easily identify the originator of the E-mail.

(maximum 63 characters)

The user can modify the minimum time interval of temperature warning mail. The default value is 60 minutes. In this case, the user cannot send another mail for 60 minutes after sending previous temperature warning mail even the set warning temperature is reached again.

(Continued on next page)

49

Page 48 Page 50
Image 49
Page 48 Page 50
Contents Commercial Use PT-DW5000ULModel number PT-D5600U/PT-D5600UL/PT-DW5000U/PT-DW5000UL Dear Panasonic CustomerPT-D5600U/PT-D5600UL/PT-DW5000U/PT-DW5000UL Contents Precautions with regard to safety Do not insert any foreign objects into the projector Do not place liquid containers on top of the projectorAlways disconnect all cables before moving the projector Use only the Specified battery AccessoriesDo not look into the lens while the projector is being used Do not use the old lamp unitPrecautions on handling Name and function of parts Set to Computer When the operation mode selectorStatus LED lights Front and side of the projectorRear view of the main unit Controls on rear panel Side-mounted connection terminals Effective range of remote control operation Using the remote control unitLoading dry cells Using the remote control as a PC mouse Setting projector ID number to remote controlOperation mode selector switch Using a wired remote control InstallationInstallation geometry Projection schemesPT-D5600U, PT-D5600UL Projection distance by projection lensInstallation 817 PT-DW5000U, PT-DW5000ULCalculation formulas for projection distance by lens types Connection Setup precautionsExample of connecting with PCs Example of connecting with AV productsMaking adjustment and selection Powering up the projectorProjection Direct power off function Powering off the projectorHow to remove the projection lens How to adjust the lensHow to adjust the lens position to the left or right Choose an item and adjust it using buttonsUsing the Freeze function Automatic adjustment Auto SetupUsing the Shutter function Using the digital zoom D.ZOOM + functionStructure of menu screens On-screen menusResetting to the factory default Menu items settingBasic menu operations Returning to the previousAdjusting the picture TV-SYSTEM Adjusting the positionSystem PositionZoom Clock PhaseKeystone Input Resolution How to use Advanced MenuDigital Cinema Reality BlankingSxga Mode XGA ModeRaster Position OPTION1 settings Lamp Power OPTION2 settingsFRONT/REAR DESK/CEILINGFAN CONTROL2 PasswordSystem Information FAN CONTROL1Setting the security Connecting the PC Setting the networkSystem requirements Connection examplePin assignments and signal names Using the serial terminalsCommunication conditions Factory setting Examples of connectionCable specifications Control commandsConnecting to a PC Computer Projector DTE specifications Pin assignments and controlIndication of lamp monitor Procedure of cleaning Cleaning and replacement of air filterClean the air filter Dismantle the air filterReplacing the lamp unit Timing of lamp unit replacementRemove the two screws securing the fan unit Lamp unit replacement stepsLamp unit will be hot after it has been used Have a Phillips screwdriver ready ahead of timeSelect the lamp which has been replaced with the and buttons Accessing from the Web browser Using Web Browser ControlPassword change Click OKPower On/Off control Shutter control Mail set up buttonChange password button Basic controlMonitor information Error informationOK Normal operation Failed Occurrence of trouble When Failed has appeared for an item Parameter Description Mail setupError Mail setup page ContinuingPOP server setup DNS server set upButton to update settings Ping testAdjust clock Contents of mail sentNetwork status Network configSupported commands Using the PJLink protocolPJLink security authentication Command Control Description RemarksPower does Symptoms ChecksRemote control Not turn onPT-D5600U PT-D5600UL PT-DW5000U SpecificationsOutside dimensions Length of power supply cord CabinetRemote control Power source Wireless mouse receiverPAL-M/PAL60 PAL/PAL-N/SECAM Compatible Signal ListInstallation dimensions diagram DimensionsTrademark Acknowledgement Concernant LA Sécurité Ne pas couvrir le filtre et la sortie d’air Précautions concernant la sécuritéNe pas surcharger la prise de courant Ne pas retirer le couvercle ou le modifierNe pas placer des récipients de liquide sur le projecteur Ne pas placer le projecteur sur des surfaces instablesNe pas mettre d’objets étrangers dans le projecteur ’utiliser que la pile indiquée Ne pas placer d’objets lourds sur le projecteur’utilisez pas un bloc lampe usagé Précautions pour la manipulation Nettoyage et maintenancePrécautions pour le transport Mise au rebutPériode de remplacement de la lampe Remplacement de la lampeLa lampe est chaude si elle vient d’être utilisée Procédure de remplacement de la lampePréparez un tournevis Phillips à l’avance INIT. Compt Technical Support Panasonic Projector Systems CompanyPanasonic Canada Inc

PT-DW5000U, PT-D5600U, PT-D5600UL specifications

The Panasonic PT-D5600UL, PT-D5600U, and PT-DW5000U projectors are designed for professional use in a variety of environments, ranging from corporate settings to educational institutions and large venues. These projectors are renowned for their exceptional image quality, versatile features, and robust performance.

At the heart of these projectors is the high-performance DLP technology, which offers remarkable brightness and contrast. The PT-D5600UL and PT-D5600U offer a brightness level of 6000 lumens, while the PT-DW5000U provides 5000 lumens, ensuring clear visibility even in well-lit rooms. This remarkable brightness coupled with a solid contrast ratio provides sharp and vivid images, whether for video presentations or intricate graphics.

The three models are equipped with a versatile lens system, which includes various optional lenses to accommodate different installation requirements. The lens shift feature enhances installation flexibility, allowing for simple adjustments to the image without distortion. The projectors support various resolutions and aspect ratios, including WUXGA (1920 x 1200) for the PT-D5600UL and PT-D5600U, and WXGA (1280 x 800) for the PT-DW5000U, ensuring that users can display content with high precision and clarity.

Panasonic’s innovative Daylight View technology enhances image quality by automatically adjusting color reproduction to match ambient lighting conditions, ensuring that images remain visible and consistent throughout the day. Furthermore, these projectors employ a durable lamp life of up to 3000 hours in normal mode, reducing maintenance needs and costs for users.

For enhanced connectivity, the PT-D5600UL, PT-D5600U, and PT-DW5000U are equipped with multiple input options, including HDMI, DVI-D, and VGA ports, supporting a range of multimedia devices. The projectors also support network monitoring and control via LAN, allowing users to manage settings and monitor performance remotely.

In terms of build quality, these projectors are designed for reliability and longevity. Their robust chassis and advanced cooling system ensure stable operation even during extended use, making them ideal for events or long presentations. Overall, the Panasonic PT-D5600UL, PT-D5600U, and PT-DW5000U projectors deliver a seamless and high-quality projection experience, solidifying Panasonic’s reputation as a leader in the projection technology market.
Top Page Image Contents