Panasonic PT-DW5000U Accessories, Use only the Specified battery, Do not use the old lamp unit

Page 7

Use only the Specified battery.

•If incorrect batteries are used, they may explode or leak, and fire, injury or contamination of the battery compartment and surrounding area may result.

Do not look into the lens while the projector is being used.

•Strong light is emitted from the projector’s lens. If you look directly into this light, it can hurt and damage your eyes.

Do not place your skin into the light beam while the projector is being used.

•Strong light is emitted from the projector’s lens. If you place directly into this light, it can hurt or damage your skin.

Do not use the old lamp unit.

•The lamp section may break.

If the lamp has broken, ventilate the room immediately. Do not touch or bring your face close to the broken pieces.

•Failure to observe this may cause the user to absorb the gas which was released when the lamp broke and which contains nearly the same amount of mercury as fluorescent lamps, and the broken pieces may cause injury.

•If you believe that you have absorbed the gas or that the gas has got into your eyes or mouth, seek medical advice immediately.

•Ask your dealer to replace the lamp unit and check the inside of the projector.

Disconnect the power cord plug from the wall outlet as a safety precaution before carrying out any cleaning.

•Electric shocks can result if this is not done.

Ask an Authorized Service Center to clean inside the projector at least once a year.

•If dust is left to build up inside the projector without being cleaned out, it can result in fire or problems with operation.

•It is a good idea to clean the inside of the projector before the season for humid weather arrives. Ask your nearest Authorized Service Center to clean the projector when required. Please discuss with the Authorized Service Center regarding cleaning costs.

Do not reach for the openings beside the optical lens, during horizontal or vertical movements of the lens there is a injury hazard.

Accessories

Check that all of the accessories shown below have been included with your projector.

Remote control unit [N2QAYA000005 x 1]

Power cord [K2CG3FZ00008 x 1]

Battery for remote control unit [R03NW/2ST x 1]

Lens cover [TKKL5244-1 x 1]

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Commercial Use PT-DW5000ULModel number PT-D5600U/PT-D5600UL/PT-DW5000U/PT-DW5000UL Dear Panasonic CustomerPT-D5600U/PT-D5600UL/PT-DW5000U/PT-DW5000UL Contents Precautions with regard to safety Do not insert any foreign objects into the projector Do not place liquid containers on top of the projectorAlways disconnect all cables before moving the projector Do not use the old lamp unit AccessoriesUse only the Specified battery Do not look into the lens while the projector is being usedPrecautions on handling Name and function of parts Set to Computer When the operation mode selectorStatus LED lights Front and side of the projectorRear view of the main unit Controls on rear panel Side-mounted connection terminals Effective range of remote control operation Using the remote control unitLoading dry cells Using the remote control as a PC mouse Setting projector ID number to remote controlOperation mode selector switch Projection schemes InstallationUsing a wired remote control Installation geometryPT-D5600U, PT-D5600UL Projection distance by projection lensInstallation 817 PT-DW5000U, PT-DW5000ULCalculation formulas for projection distance by lens types Connection Setup precautionsExample of connecting with PCs Example of connecting with AV productsMaking adjustment and selection Powering up the projectorProjection Direct power off function Powering off the projectorChoose an item and adjust it using buttons How to adjust the lensHow to remove the projection lens How to adjust the lens position to the left or rightUsing the digital zoom D.ZOOM + function Automatic adjustment Auto SetupUsing the Freeze function Using the Shutter functionStructure of menu screens On-screen menusReturning to the previous Menu items settingResetting to the factory default Basic menu operationsAdjusting the picture Position Adjusting the positionTV-SYSTEM SystemZoom Clock PhaseKeystone Blanking How to use Advanced MenuInput Resolution Digital Cinema RealitySxga Mode XGA ModeRaster Position OPTION1 settings DESK/CEILING OPTION2 settingsLamp Power FRONT/REARFAN CONTROL1 PasswordFAN CONTROL2 System InformationSetting the security Connection example Setting the networkConnecting the PC System requirementsExamples of connection Using the serial terminalsPin assignments and signal names Communication conditions Factory settingPin assignments and control Control commandsCable specifications Connecting to a PC Computer Projector DTE specificationsIndication of lamp monitor Dismantle the air filter Cleaning and replacement of air filterProcedure of cleaning Clean the air filterReplacing the lamp unit Timing of lamp unit replacementHave a Phillips screwdriver ready ahead of time Lamp unit replacement stepsRemove the two screws securing the fan unit Lamp unit will be hot after it has been usedSelect the lamp which has been replaced with the and buttons Click OK Using Web Browser ControlAccessing from the Web browser Password changeBasic control Mail set up buttonPower On/Off control Shutter control Change password buttonMonitor information Error informationOK Normal operation Failed Occurrence of trouble When Failed has appeared for an item Parameter Description Mail setupError Mail setup page ContinuingPing test DNS server set upPOP server setup Button to update settingsAdjust clock Contents of mail sentNetwork status Network configCommand Control Description Remarks Using the PJLink protocolSupported commands PJLink security authenticationNot turn on Symptoms ChecksPower does Remote controlPT-D5600U PT-D5600UL PT-DW5000U SpecificationsWireless mouse receiver Length of power supply cord CabinetOutside dimensions Remote control Power sourcePAL-M/PAL60 PAL/PAL-N/SECAM Compatible Signal ListInstallation dimensions diagram DimensionsTrademark Acknowledgement Concernant LA Sécurité Ne pas retirer le couvercle ou le modifier Précautions concernant la sécuritéNe pas couvrir le filtre et la sortie d’air Ne pas surcharger la prise de courantNe pas placer des récipients de liquide sur le projecteur Ne pas placer le projecteur sur des surfaces instablesNe pas mettre d’objets étrangers dans le projecteur ’utiliser que la pile indiquée Ne pas placer d’objets lourds sur le projecteur’utilisez pas un bloc lampe usagé Mise au rebut Nettoyage et maintenancePrécautions pour la manipulation Précautions pour le transportPériode de remplacement de la lampe Remplacement de la lampeLa lampe est chaude si elle vient d’être utilisée Procédure de remplacement de la lampePréparez un tournevis Phillips à l’avance INIT. Compt Technical Support Panasonic Projector Systems CompanyPanasonic Canada Inc

PT-DW5000U, PT-D5600U, PT-D5600UL specifications

The Panasonic PT-D5600UL, PT-D5600U, and PT-DW5000U projectors are designed for professional use in a variety of environments, ranging from corporate settings to educational institutions and large venues. These projectors are renowned for their exceptional image quality, versatile features, and robust performance.

At the heart of these projectors is the high-performance DLP technology, which offers remarkable brightness and contrast. The PT-D5600UL and PT-D5600U offer a brightness level of 6000 lumens, while the PT-DW5000U provides 5000 lumens, ensuring clear visibility even in well-lit rooms. This remarkable brightness coupled with a solid contrast ratio provides sharp and vivid images, whether for video presentations or intricate graphics.

The three models are equipped with a versatile lens system, which includes various optional lenses to accommodate different installation requirements. The lens shift feature enhances installation flexibility, allowing for simple adjustments to the image without distortion. The projectors support various resolutions and aspect ratios, including WUXGA (1920 x 1200) for the PT-D5600UL and PT-D5600U, and WXGA (1280 x 800) for the PT-DW5000U, ensuring that users can display content with high precision and clarity.

Panasonic’s innovative Daylight View technology enhances image quality by automatically adjusting color reproduction to match ambient lighting conditions, ensuring that images remain visible and consistent throughout the day. Furthermore, these projectors employ a durable lamp life of up to 3000 hours in normal mode, reducing maintenance needs and costs for users.

For enhanced connectivity, the PT-D5600UL, PT-D5600U, and PT-DW5000U are equipped with multiple input options, including HDMI, DVI-D, and VGA ports, supporting a range of multimedia devices. The projectors also support network monitoring and control via LAN, allowing users to manage settings and monitor performance remotely.

In terms of build quality, these projectors are designed for reliability and longevity. Their robust chassis and advanced cooling system ensure stable operation even during extended use, making them ideal for events or long presentations. Overall, the Panasonic PT-D5600UL, PT-D5600U, and PT-DW5000U projectors deliver a seamless and high-quality projection experience, solidifying Panasonic’s reputation as a leader in the projection technology market.
Top Page Image Contents