Panasonic PT-DW5000U manual Basic menu operations, Returning to the previous, Menu items setting

On-screen menus

Basic menu operations

Press the “MENU” button.

The MENU appears on the screen.

MENU

PICTURE

POSITION

ADVANCED MENU

LANGUAGE

OPTION1

OPTI0N2

TEST PATTERN

SECURITY

NETWORK

SELECT ENTER EXIT

Returning to the previous page

•Pressing the “MENU” button returns the screen to the previous menu page.

•When the MENU is on the screen, pressing the “MENU” button clears all menus from the screen.

Menu items shown in transparent characters

•Some menu items may not be valid for certain signal formats applied to the projector.

The menu items that cannot be adjusted or used are shown in transparent characters, and they cannot be selected even by pressing the ENTER button.

Select (highlight) the desired item with

the or buttons.

Selected items are displayed in blue.

MENU

PICTURE

POSITION

ADVANCED MENU

LANGUAGE

OPTION1

OPTI0N2

TEST PATTERN

SECURITY

NETWORK

SELECT ENTER EXIT

Menu items setting

•The bottom prompt line differs on each menu

depending on the selected menu option:

• A prompt “ ADJ” appears when changing the setting.

•A prompt “ ENTER” appears for a separate bar graph.

Resetting to the factory default

STD (standard) button is used to reset all of the projector adjustment values to the default levels which were set at the time of shipment from the factory.

Press the “ENTER” button to enter your selection.

The submenu for the selected option will now open. (e.g. : PICTURE Menu)

	PICTURE
PICTURE MODE		GRAPHIC
BRIGHT		32
CONTRAST		32
COLOR TEMP.		DEFAULT
WHITE GAIN		10
SHARPNESS		06
NR		OFF
AI		ON
SYSTEM		RGB
SELECT	ADJ		RETRN

Highlight the desired adjustment item

with the or buttons, then change the parameter value with the or buttons.

(Example of separate adjustment screen)

BRIGHT32

	PICTURE
PICTURE MODE		GRAPHIC
BRIGHT		32
CONTRAST		32
COLOR TEMP.		DEFAULT
WHITE GAIN		10
SHARPNESS		06
NR		OFF
AI		ON
SYSTEM		RGB
SELECT	ADJ		RETRN

•If the parameter value on a bar graph is reset to the factory default, the bar turns to white.

Note • The upper and lower triangular markings on a bar graph indicate the default setting for the parameter. If no such triangular markings are shown on the bar graph, the parameter cannot be reset to the factory default.

Indicates the current	Indicates the
parameter value.	factory default.

• If no button is operated for approx. 5 seconds while a bar graph is displayed, the screen will

28

return to the previous page.