Menu Navigation
Navigating through the menu
Displaying the Main menu
Press the MENU button to display the main menu.
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
TEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
MENU SELECT
ENTER SUB MENU
Adjusting with the bar scale items
The triangle mark under the bar indicates factory default setting and the square indicates the current setting.
Current setting
CONTRAST | 0 |
ADJUST |
|
| Default |
Returning to the previous menu
Press the MENU button to return to the previous menu. Press repeatedly to escape from the menu mode and return to the projection.
Operating procedure
1.Press F G to scroll to the required main menu item and press the ENTER button to select.
The selected item is highlighted in orange and the sub- menu is displayed.
See “Main menu and
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
TEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
MENU SELECT
ENTER SUB MENU
2.Press F G to scroll to the required
The selected item is called up and the other menu items disappear from the screen. Called up item will be disappear after 5 seconds and return to the menu mode.
If there is a lower level, the next level will be displayed.
POSITION
SHIFT |
|
ASPECT | AUTO |
ZOOM |
|
CLOCK PHASE | 0 |
GEOMETRY | KEYSTONE |
Settings
MENU SELECT
ENTER CHANGE
3.Press I H to adjust or set the selected item.
For items using a bar scale, the current settings are displayed on the left of the bar scale.
You can cycle through the options of an item by pressing I H.
CONTRAST | 0 |
ADJUST
4. Press the MENU button to return to the previous menu.