Monitor Lamp indicators
FILTER indicator
The FILTER indicates the Auto Cleaning Filter (ACF) unit status.
Lamp | Information |
| Check point |
| Remedial measure |
indication |
|
| |||
|
|
|
|
| |
|
| • | Check the REMAINING FILTER | • | Replace the ACF unit. |
Lighting in red | The ACF unit has run out. |
| of STATUS in PROJECTOR |
|
|
|
|
| SETUP menu. |
|
|
Blinking in red | The ACF unit is not | • | Check the ACF unit | • | Replace the ACF unit. |
installed.*1 |
| compartment. |
|
| |
|
|
|
| ||
| The ACF unit remains | • | Check the REMAINING FILTER | • | Request the dealer to purchase the new |
Lighting in | few. The remaining use |
| of STATUS in PROJECTOR |
| ACF unit. |
time of the ACF unit is |
| SETUP menu. |
|
| |
orange |
|
|
| ||
approximately |
|
|
|
| |
|
|
|
|
| |
| 200 hours.*2 |
|
|
|
|
|
| • | Is foreign object blocking the | • | Remove the foreign object from the ACF |
Blinking in | The ACF unit cannot |
| ACF unit operation? |
| unit. |
orange | operate properly. |
|
| • When the foreign object still remained, | |
|
|
|
|
| contact the dealer. |
*1. When the ACF unit is not installed, displays “THE AIR FILTER HAS NOT BEEN INSTALLED PROPERLY.” message and power off with the indicator blinking in red.
*2. 200 hours is the roughly guided time.
NOTE:
•When the FILTER indicator is flashing green, the Auto Cleaning Filter (ACF) is normally rolling up.
•When the ACF unit is operating, operational sound may be heard.
•In a dusty environment, the guided remaining use time will be shorter. Contact the dealer to purchase the new ACF unit earlier.
•If using the projector at high elevations 1 400 - 2 700 m (4 593 - 8 858 ft) sea level and HIGH ALTITUDE MODE in PROJECTOR SETUP menu is OFF, it may cause malfunction of the ACF unit.
Maintenance