Panasonic PT-LW80NTU manual Switching the projector on/off, Power cord, Connecting

Page 18

Switching the projector on/off

Power cord

Connecting

Disconnecting

1.Make sure the shape of the power plug and the AC IN terminal on the back of the projector match, then push the plug all the way in.

1.Unplug the power cord from the wall outlet.

2.Depress the latch and slide the cover off.

Basic Operation

2.Align the side of the power cord secure lock with the side guide rail of the AC IN terminal of the projector and slide it in.

Rail guide

3.Place the latch to the latch catcher and press until it clicks.

Latch

4.Connect the power cord to a wall outlet.

5.The POWER and POWER LOCK indicators light in red and the projector stays in standby mode.

Latch

3.Slide the power cord secure lock up along the side guide rail and remove.

Rail guide

4.Hold the plug and unplug the power cord from the AC IN terminal on the back of the projector.

POWER indicator lights in orange if the internal cooling fan is still operating by internal power supply.

Direct power off function

You can switch off the electric power supply any time by unplugging the power plug from the wall outlet or by switching off the main power. The internal lamp cooling fan keeps operating by the internal power supply, and stops automatically when cooled enough.

Direct power on function

If the DIRECT POWER ON in OPTION menu is set to ON, connect the power cord to a wall outlet and the projection will start even when the control panel is disabled or the POWER button is locked. See “DIRECT POWER ON” on page 36.

If the DIRECT POWER ON is set to OFF, the projector will be at the same mode as last unplugged, standby mode or projection mode.

NOTE:

•Do not use other than a provided power cord.

•Ensure all the input devices are connected and turned off before connecting the power cord.

•Do not force the connector as this may damage the projector and/or the power cord.

•Dirt or dust build-up around plugs may cause fire or electrical hazards.

•Switch off the power to the projector when not in use.

•If the projector is switched on again while the internal cooling fan is still operating by the internal power supply, it may take a while to start the projection.

•Do not put the projector into the carrying bag with the POWER indicator lit.

ENGLISH - 18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Operating Instructions Important Safety Notice Dear Panasonic CustomerTrade Name Important Safety NoticeDeclaration of Conformity PanasonicContents Contents SettingsMaintenance AppendixPrecautions with regard to safety Do not look into the lens while the projector is being used Precautions with regard to safetyDo not set up the projector outdoors Lamp cover gets very hot, and touching it can cause burnsUse only the specified batteries Remove the used batteries from the remote control promptlyDo not put your weight on this projector Do not mix old and new batteriesOptical components SecurityOrder to get the best picture quality Liquid crystal panelAccessories K1HA15DA0002Minimum required setting screen Read this firstTop and front view About Your ProjectorProjector body Control panelRemote control signal receptor Lamp unit compartment About Your Projector Back and bottom viewAbout Your Projector Remote controlBattery compartment Top view Attaching a hand strapSetting up Screen size and throw distanceCalculation methods Projection method Front leg adjusters and throwing angleSetting up Mounting in the ceiling and projecting from frontConnecting with Video IN/S-VIDEO Connecting example AV equipmentConnecting example Computers ConnectionsConnecting Switching the projector on/offPower cord Direct power off functionBy control panel operation By remote control operation Switching on the projectorSwitching the projector on/off By direct power on functionBy direct power off function Switching off the projectorBy remote control operation By control panel operationPower and Power Lock indicators Power Lock indicator statusPower indicator status Selecting the input signal Projecting an imagePositioning the image Operating range Remote control operationSetting up the image position automatically Facing to the projectorRemote control operation Switching the input signalResetting to the factory default settings Capturing an imageProjecting an image in INDEX-WINDOW mode Using an assigned functionControlling the volume of the speaker Shifting the center point Enlarging the centered areaEnlarging the image Press any side of the Digital Zoom +/- button onceMenu Navigation Navigating through the MenuMenu Navigation Still ModeMain menu and Sub-menu TV-SYSTEMClosed Caption Setting Picture menu Detailed Setup For S-VIDEO/VIDEO signalsFor RGB signals Position menu Aspect ratio options Image will be projected without any size adjustmentAspect 169Frame Lock Position menu Aspect ratio depend on signalsOver Scan Screen Format menu OptionOption menu Direct Power on Lamp PowerPower OFF Timer Auto SetupTest Pattern Closed Caption SettingScreen Format Function ButtonAudio Balance Security menu Input PasswordPassword Change Text DisplayText Change Security menuText Display Wireless menu Items in Wireless menuWireless menu, the following items are available Lamp indicator Lamp and Temp IndicatorsManaging the indicated problems Temp indicatorCare and Replacement Cleaning the projectorReplacing the Lamp unit Care and ReplacementWhen to replace the Lamp unit Before replacing the lamp unitCare and Replacement Replacement procedure Resetting the Lamp RuntimeRemoving and replacing the lamp unit Troubleshooting Quality*2 List of compatible signalsTechnical Information Dots*1 KHz MHzSerial terminal Computer connection guidance Technical Information Cable specificationsControl commands ProjectorSpecifications Computer Audio VideoAudio Variable AudioCalculation methods for Screen size and throw distance for 169/43 aspect ratio169 Projection size 16 Throw distance LDimensions Trademark acknowledgementsUnit mm Index Position Power IndexAvis important concernant la sécurité Numéro de sérieDéclaration de conformité Avis important concernant la sécuritéAvertissement Modèle nPrécautions de sécurité AvertissementsNe pas obstruer les orifices dentrée et de sortie dair Mises EN GardePrécautions de sécurité Ne pas utiliser le projecteur à lair libreSinon cela peut causer des chocs électriques Retirer les piles usées de la télécommande au plus vitePrécautions lors du transport Utiliser uniquement les piles spécifiéesSécurité Précautions lors de linstallationPrécautions lors de lutilisation Affichage à cristaux liquidesRemplacement de lunité de la lampe Délai de remplacement de lUnité de la lampeAvant de remplacer le lunité de la lampe Retirer et remplacer la lampe Réinitialisation de Durée DE LA LampePanasonic Projector Systems Company Technical Support
Top Page Image Contents