Fujitsu Q550 manual Selecting a location, Mains adapter connecting

Page 22

First-time setup of your device

Selecting a location

Select a suitable location for the device before setting it up. Follow the instructions below when doing so:

•Never place the device or the mains adapter on a heat-sensitive surface. The surface could be damaged as a result.

•Never place the device on a soft surface (e.g. carpeting, upholstered furniture, bed). This can block the air vents and cause overheating and damage.

•The underside of the device heats up during normal operation. Prolonged contact with the skin may become unpleasant or even result in burns.

•Place the device on a stable, ﬂat, non-slippery surface. Please note that the rubber feet of the device may mark certain types of delicate surfaces.

•Keep other objects at least 100 mm away from the device and its mains adapter to ensure adequate ventilation.

•Never cover the ventilation slots of the device.

•Do not expose the device to extreme environmental conditions. Protect the device from dust, humidity, and heat.

Mains adapter connecting

Observe the safety notes in the enclosed "Safety/Regulations" manual.

The supplied power cable conforms to the requirements of the country in which you purchased your device. Make sure that the power cable is approved for use in the country in which you intend to use it.

3

2

1

►Connect the power cable (1) to the mains adapter.

►Plug the mains cable (2) into a mains outlet.

►Connect the mains adapter cable (3) to the DC jack (DC IN) of the device.

18	Fujitsu Technology Solutions

Image 22

Contents Stylistic Q550 Page Page Copyright Stylistic Q550 Page Contents Conﬁguring password protection in Bios Setup Utility FCC Regulatory information for Tablet PCs with radio device Contents Further information Innovative technologyInnovative technology Notational conventions Not switch off the deviceThis font Ports and controls Ports and controlsPorts and controls Rear Important notes Safety notesAdditional safety notes for devices with radio components Important notesProtecting the display screen Important notes Important notes Energy saving under Windows Energy saving Travelling with your Tablet PC Before you travelCleaning the Tablet PC Transporting the Tablet PCFirst-time setup of your device First-time setup of your deviceUnpacking and checking the device Mains adapter connecting Selecting a locationSwitching on the device for the ﬁrst time Battery charging indicator Status indicatorsStatus displays Description Power-on indicator Working with the Tablet PCSwitching off the Tablet PC Switching on the Tablet PCProgramming the ON/OFF switch Example Handwriting recognition under WindowsTouchscreen Background lightingWindows Using ﬁngersOperating system Menu Actions with one ﬁnger Action DescriptionActions with two ﬁngers ActionWorking with the Tablet PC Action Actions with three ﬁngers Description Scrolling through all open ﬁles in a program Actions with four ﬁngers Enlarging the area Paging through fast scrolling Using the stylus pen = pen tip = pen button = eyelet for pen cordCalibrating the pen Setting the penHandling Mouse Pen Removing the pen battery Changing the pen tipInstalling a pen battery Installing a pen cordTablet buttons Basic functions before the device has bootedApplication menu/boot Function, if the key is Function in TPM PPI KeyShort press On-screen keypad Programming a tablet buttonChange screen orientation Long press No function storedRechargeable battery WebcamMonitoring the battery charging level Charging, caring for and maintaining the batteryRemoving and installing the battery Battery storageRemoving the battery Installing battery Battery capacity display LED indicator State of chargeUsing the power-management features Supported format Memory cardsInserting the memory card SIM card Removing the memory cardInserting the SIM card Wireless LAN / Bluetooth / UmtsRemoving a SIM card Switching the wireless components on and off Setting up Wlan access Access via UmtsYour Cradle optional Cradle componentsSetting up the Cradle Connecting the Tablet PC to the CradleWorking with the Tablet PC Disconnecting the Tablet PC from the Cradle Conﬁguring the ﬁngerprint sensor Security functionsSecurity functions Conﬁguring password protection in Bios Setup Utility Protecting Bios Setup Utility supervisor and user passwordSetting supervisor and user password Password protection for booting of the operating system Activating system protectionPassword protection for the hard disk Activating hard disk protectionSmartCard reader Inserting the SmartCardEnabling TPM Trusted Platform Module TPM device-dependentDisabling TPM Connecting devices to the Tablet PC Connecting external devicesConnecting external devices Disconnecting devices from the Tablet PCHdmi port How to remove USB devices correctly Connecting USB devicesDevice drivers Headphone port Starting the Bios Setup Utility Settings in Bios Setup UtilitySettings in Bios Setup Utility Operating Bios Setup Utility Load Setup Defaults Copy Standard Entries Exiting Bios Setup UtilitySave Changes and Power Off Help if problems occur Troubleshooting and tipsTroubleshooting and tips Tablet PC’s touchscreen remains dark Battery indicator does not illuminateTablet PC’s date or time is incorrect Display on the Tablet PC’s touchscreen is difﬁcult to readExternal monitor remains blank External monitor is blank or the image is unstablePen movements Tablet PC does not start after switch onCursor does not correctly follow Pen input not workingPrinter does not print Tablet PC stops workingRadio connection to a network does not work SmartCard PIN forgotten Battery discharges too quicklySmartCard reader is not recognised SmartCard lostUser and/or supervisor SmartCard lost Error messages on the screenAcoustic warnings Error message/cause Resolution Technical data Tablet PCMains adapter 40 W Technical data Ambient conditionsCradle optional Declarations of Conformity Manufacturer’s notesDisposal and recycling Manufacturer’s notesRegulatory information for Tablet PCs without radio device CE markingRegulatory notices CE marking for devices with radio componentManufacturer’s notes DOC Industry Canada notices Avis Aux Utilisateurs Du Réseau Téléphonique CanadienUL Notice For Authorized Repair Technicians OnlyFCC Interference Statement FCC Regulatory information for Tablet PCs with radio deviceFederal Communications Commission statement FCC Radio Frequency Exposure statementManufacturer’s notes Regulatory Information/Disclaimers Export restrictionsIndex Off Index