Connecting external devices
Connecting external devices
Under all circumstances, please observe the safety notes provided in the "Important notes", Page 11 chapter before connecting or disconnecting any devices to or from your Tablet PC.
Always read the documentation supplied with the device you wish to connect. Never connect or disconnect cables during a thunderstorm.
Never pull at a cable when disconnecting it. Always grasp the plug.
Adhere to the order described below when you connect external devices to the Tablet PC or separate them from it:
With some devices, such as USB devices, it is not necessary to switch off the Tablet PC and the device before connecting/disconnecting. For more information about whether or not devices need to be switched off, please refer to the documentation supplied with the external device.
Some of the external devices require special drivers (see the operating system and external device documentation).
Connecting devices to the Tablet PC
1.Switch off the Tablet PC and all external devices.
2.Remove the mains plug for the Tablet PC and all relevant devices from the sockets.
3.Connect the cables for your external devices following the instructions.
4.Plug all power cables into the mains sockets.
Disconnecting devices from the Tablet PC
1.Switch off the Tablet PC and all external devices.
2.Remove the mains plug for the Tablet PC and all relevant devices from the sockets.
3.Disconnect the cables for your external devices following the instructions.
Fujitsu Technology Solutions | 61 |