Fujitsu ST5000 warranty Confirming connection, Confirming the status of the radio

Page 67

5.Enter the sharing printer name in [Share name].

6.Click the [OK] button.

Confirming connection

After you have finished the network setup operations, access the folder whose sharing has been set for other personal computers. Also, confirm the status of the radio waves in case of trouble such as a network connection failure.

In the case of access point (infrastructure) connection, enter the necessary data for the access point before confirming connection. Refer to the manual of the access point for the access point setup procedure.

Connecting your personal computer to another personal computer

1.Click [Start] first and then [My Computer]. The [My Computer] window will be displayed in the left frame.

2.Click [My Network Places] in the “Other Places” list. The window [My Network Places] will be dis- played.

3.Click [View workgroup computers] under Network Tasks in the left frame.

4.Double-click the personal computer to which your personal computer is to be connected. The folder that was specified in “Setting the file-sharing func- tion” on page 56 will be displayed.

5.Double-click the folder to be accessed.

Confirming the status of the radio

Intel PROSet Wireless LAN:

1.Click [Start] -> [All Programs] -> [Intel Network Adapters] -> [Intel(R) PROSet]. The [Intel(R) PROSet] window will be displayed.

2.Click the [General] tab and confirm radio status in the window displayed. The current connection sta- tus will be displayed.

■Signal Quality

The quality of the signals is displayed on a graph.

■Network name (SSID)

The connected network name (SSID) is displayed.

■Profile name

“<No profile>” is displayed.

W i r e l e s s L A N U s e r ’ s G u i d e

■Mode

If access point (infrastructure) connection is in use, “Infrastructure (AP)” will be displayed. If ad hoc connection is in use, “Ad hoc (Peer-to-peer)” will be displayed.

■Security

Displays the encryption type currently used by the radio.

■Speed

Displays the current data rate used by the radio to transmit and receive data.

■Band (Frequency)

The current operating frequency band is displayed. When communication is possible, “802.11b (2.4 GHz)” is displayed.

■Channel

The channel number currently being used for the communications is displayed.

If connection cannot be made to the network or if you want to check for normal connection, see “Trouble- shooting” on page 60.

Atheros Wireless LAN:

1.Right-click the Atheros icon in the lower right cor- ner of the screen.

2.Click [Open Client Utility]. The Atheros Wireless Configuration Utility window opens.

3.Contained within the Current Status tab and Advanced Current Status, you will find the current operating status of the radio. (When the radio is turned off or the computer is not yet connected, some of the conditions will not be displayed.)

■Profile Name

The current configuration profile is displayed.

■Network Type - Configured Network Type [Access Point] or [AdHoc] will be displayed.

■Current Mode

Indicates the frequency and data rate currently used by the radio.

■Current Channel

The channel number currently used by the radio.

■Link Status

Displays the current connected state of the WLAN module.

■Encryption Type

Displays the encryption type currently used by the radio.

57

Page 66 Page 68
Image 67
Page 66 Page 68
Contents Declaration of Conformity Copyright and Trademark InformationPage Table of Contents Agency Notices Preface Page Fujitsu Contact Information Warranty InformationPreface About this GuidePage Getting Started with Your Stylistic ST5000 Series Tablet PC Page IN-BOX Items for the Stylistic ST5000 Series Tablet PC Getting Started with Your Stylistic Tablet PCOptional Accessories Swipe Sensor Stylistic Tablet PC FeaturesBack Features Top Features Left-Side Features Right-Side Features Icon Mode/State LED State Remarks Status DisplayHDD AccessDescription Tablet Button SettingsApplication Buttons Tablet IconApplication Buttons Primary and Secondary Functions Navigation Buttons Tertiary Functions of Application and Navigation Buttons Passwords Setting UP the Security PanelSecurity Functions of Application Buttons Precautions Using Your Security PanelUninstalling the Security Panel Application Open Add or Remove Programs Properties in the Control Panel Reinstalling the Security Panel ApplicationUser SupervisorConnector Tablet PC Purpose Peripheral Connectors and Peripheral InterfacesPeripheral Connectors/Interfaces Using Your Stylistic ST5000 Series Tablet PC Page System States Using the Stylistic ST5000 Series Tablet PCCurrent State To Change State Powering UP the Tablet PCShutting Down the System Suspending System OperationPower icon is not displayed Hibernate Save-to-Diskmode Power icon is blinking Suspend-to-RAMmodeSystem operation is suspended From Hibernate Save-to-Disk mode Adjusting the Display BrightnessUsing the PEN From Suspend-to-RAM modeCalibrating the PEN Installing a PEN TetherCharging the Battery Replacing the PEN TIP100% Removing and Installing the BatteryTips for Conserving Battery Power 90%Memory STICK/SD Card Slot Operation of the Bridge BatteryInstalling Memory Stick/SD Cards Modem ConnectionPC Card Slot Removing and Installing Memory ModulesRemoving a Memory Module Installing a Dimm ModulePage Care and Maintenance Page Caring for Your Tablet PC Care and MaintenanceProtecting the Display Screen Avoiding Overheating Cleaning the Display ScreenTroubleshooting Storing the Tablet PCRestoring Your PRE-INSTALLED Software Procedure Boot Priority ChangeRestoring the Factory Image Specifications Page Physical Specifications Stylistic ST5000 Series Hardware SpecificationsStylistic ST5000 Specifications Display SpecificationsAgency Approval Specifications Power SpecificationsAdditional Specifications Agency Notices Page FCC Notices Regulatory InformationAvis Aux Utilisateurs Du Réseau Téléphonique Canadien System Disposal UL NoticeAC Adapter output polarity For Authorized Repair Technicians OnlyPage Appendix a Page FCC Regulatory Information Wireless LAN Modes Using this Wireless Module Before Using the Wireless LANTypes of Wireless LANs Covered by this Document Characteristics of the Wireless ModuleHow to Handle This Wireless Module Access Point Infrastructure Mode See Figure A-2For Better Communications Starting Transmission Deactivation using the wireless switchDeactivation using Windows Stopping TransmissionAssigning parameters Connecting the WlanPreparation for Wireless LAN Connection Flow of OperationsClose the Wireless Network window Connection to the Network Setting the networkSetting TCP/IP Setting the sharing functionSetting the file-sharing function Setting the Microsoft network-sharing serviceSetting the printer-sharing function Confirming the status of the radio Confirming connectionCountry Transmit Power LevelPower Save Mode IP AddressSetting of channels during ad hoc connection Other settingsSetting of POWER-SAVING Function Setting of transmission power during ad hoc connectionConnection TroubleshootingUnavailable NetworkSoon after Access pointCommunication Is disconnectedWireless LAN Glossary Wi-Fi Open system authenticationShared key authentication Ssid Service Set IdentifierIP address information Specification SpecificationsWarranty Using the Bluetooth DeviceWhat is BLUETOOTH? Where to Find Information About BluetoothAppendix B Page Getting Started Installing OmnipassInstalling the OmniPass Application Introducing the Optional Fingerprint Sensor DeviceVerifying Information about OmniPass Uninstalling OmniPassMaster Password Concept User EnrollmentRemembering a Password Using OmnipassPassword Replacement OmniPass Authentication ToolbarLogging in to a Remembered Site Password ManagementExporting and Importing Users Configuring OmnipassIdentities and Password Management OmniPass User IdentitiesThings to Know Regarding Import/Export Omnipass Control CenterExporting an OmniPass User Profile Importing an OmniPass User ProfileSystem Settings User SettingsFirst option, Automatically log on to OmniPass as Cannot add Windows users to OmniPass Cannot add a User with a Blank Password to OmniPassEnabling the Security Chip in Bios Trusted Platform Module InstallationInstalling the TPM Applications ProcedurePage Index Adjusting the display brightness Air flow ventsMicrophone Microphone jack Storing the system unit Stylistic ST5000 Y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C
Top Page Image Contents