Zebra Technologies P520 Card Thickness Control Lever, Card thickness, Card Output Hopper

Page 18

C- CARD THICKNESS CONTROL LEVER

This items is operated by the user to prevent more than one card feeding into the printer at the same time and causing a jam.

Open cover, and adjust lever to the correct position for the card thickness you are using. Repeat for different card thickness. (Factory setting is for 30 mil (0,762 mm) card thickness). See diagram below:

Card thickness:

A - 60mil (1.524mm) to 50mil (1.27mm)

B - 40mil (1.016mm)

C - 30mil (0.762mm)

D - 20mil (0.508mm)

E* - Less than 20mil (0.508mm)

*Start at lowest position and move lever up to match card thickness.

For other card thickness, start lever at lowest position and move up until cards feed.

Note: For Lamination cards should only be 30 mil cards, and composite PVC is prefered

D - CARD OUTPUT HOPPER

This items is used for printing cards.

Install card Output hopper onto printer by hooking over bottom edge of card exit aperture.

OPERATION 11

Image 18

Contents User’s Manual P520 For USA and Latin America For Europe, Asia and PacificWarranty Information European Council Directive Compliance to StandardsSmart Card Power CordThank you for choosing the Eltron P520 Plastic Card Printer Magnetic EncoderIcons Table of Contents Appendix a Getting STARTED1 Unpacking your card printerGetting Started Indicators and Control Printer Installation Printer Features OPERATION2Loading Printing Ribbons Operation Loading Lamination Patch Loading Cards Card FeederInstall Card Cleaning Cartridge OperationCard Thickness Control Lever Card thicknessCard Output Hopper When to Maintain HOW to MaintainRejected Card Box Operation Feeding one card at a time Printing a Test Card Front Side Printer Operation Back Side Laminator OperationPrinter Menu Information Menu Button NEXTleft Clear Button SELECTrightPrinter Defaults Print ParametersMenu Tree Printing station continuation Off st +100 Patch ClearFirmware Peel offPrinting a Sample 3CARD Printing a Sample Card To install the P520 Printer Driver in windows 2000/NT4.0 Set Printer Driver OptionsPrinting a sample card Front Side Back SideCLEANING4 Protect Your Factory WarrantyCleaning System When to CleanHOW to Clean Cleaning the Print Head Cleaning the Laminator Rollers Card Cleaning Cartridge Cleaning TROUBLESHOOTING5 Interpreting LCD Display messagesScreen Message Meaning Action Printing Black Reject BOX Full About the Laminator Station Print Quality Issues SolutionPrinting shows blurry printed image. Possible Cause No printing on the card Technical SPECIFICATIONS6 GeneralCard Dimensions Interfaces Centronic Cable Interface Appendix Magnetic Card Stripe EncoderIntroduction Media Loading Orientation Magnetic Encoder Cleaning ISO Standard EncodingSmart Card Contact Station Appendix BSmart Card Pins Contact Points Smart Card Contact Station InterfaceAccessories & Supplies Ribbons for Printing onlyRibbons for Printing and Lamination Printing Station Cards for Printing and Lamination Cards for Printing onlyPatches for Lamination Documentation Cleaning SuppliesPrinter supplies MiscellaneousZebra Technologies Corporation Eltron Card Printer Products Corporate HeadquartersZebra Technologies Corporation