Zebra Technologies P520 user manual Interfaces

Page 46

Ribbons

Monochrome: 1500 cards/roll

 

Monochrome colors: back, red, blue, green, yellow,

 

silver, gold, white.

 

K-resin + O: 800 cards/roll

 

K-dye + O: 800 cards/roll

 

YMC: 300 cards/roll

 

YMCK: 250 cards/roll

 

YMCK-K: 200 cards/roll

 

YMCKO: 350 cards/roll

 

YMCKOK: 250 cards/roll

Patches

Clear Patch 1 or 0.6 mil

 

Clear Patch for mag. stripe 1 or 0.6 mil

 

Clear Patch for smart card 1 or 0.6 mil

 

Hologram Pcard Patch 1 or 0.6 mil

 

Advantage seal Pcard image Patch 1 mil

 

Hologram Pcard full overlay

 

Varnish full overlay

Overlay Varnish

Thermal transfer

 

4 microns thick

 

Clear and holographic options:

 

- Clear

 

- Genuine/Secure Hologram

 

- Custom Hologram

Interfaces

Centronics Parallel Standard

 

USB port (Optional)

Mechanical

Width: 31,69” (805mm*)

 

Depth: 9,25” (235mm*)

 

Height: 10,43” (265mm*)

 

Weight: 47,28 Ibs (21,45 kg)

Electrical

110 ~ 230 Volts AC, 60 ~ 50 Hz

 

FCC Class A, CE, UL, and CUL approved

Environmental

Operating Temperature: 60 to 86°F (15 to 30°C)

 

Operating Humidity: 20 to 65% non condensing

 

Storage Temperature: -23 to 158°F (-5 to 70°C)

 

Storage Humidity: 20 to 70% non condensing

 

Ventilation: Free air

Dye sublimation printing requires dye sublimation ribbons,with either black or cyan, magenta, and yellow (plus black resin) panels.

*Measured without card output hopper.

Options

USB port

 

Smart card Contact Station (0.76mm cards only)

 

Magnetic Encoder (0.76mm cards only)

 

Cleaning supplies

TECHNICAL SPECIFICATION 41

Image 46
Contents User’s Manual P520 For USA and Latin America For Europe, Asia and PacificWarranty Information European Council Directive Compliance to StandardsSmart Card Power CordThank you for choosing the Eltron P520 Plastic Card Printer Magnetic EncoderIcons Table of Contents Appendix a Getting STARTED1 Unpacking your card printerGetting Started Indicators and Control Printer Installation Printer Features OPERATION2Loading Printing Ribbons Operation Loading Lamination Patch Loading Cards Card FeederInstall Card Cleaning Cartridge OperationCard thickness Card Thickness Control LeverCard Output Hopper HOW to Maintain When to MaintainRejected Card Box Operation Feeding one card at a time Printing a Test Card Front Side Printer Operation Back Side Laminator OperationPrinter Menu Information Menu Button NEXTleft Clear Button SELECTrightPrinter Defaults Print ParametersMenu Tree Printing station continuation Off st +100 Patch ClearFirmware Peel offPrinting a Sample 3CARD Printing a Sample Card To install the P520 Printer Driver in windows 2000/NT4.0 Set Printer Driver OptionsPrinting a sample card Front Side Back SideCLEANING4 Protect Your Factory WarrantyWhen to Clean Cleaning SystemHOW to Clean Cleaning the Print Head Cleaning the Laminator Rollers Card Cleaning Cartridge Cleaning TROUBLESHOOTING5 Interpreting LCD Display messagesScreen Message Meaning Action Printing Black Reject BOX Full About the Laminator Station Print Quality Issues SolutionPrinting shows blurry printed image. Possible Cause No printing on the card Technical SPECIFICATIONS6 GeneralCard Dimensions Interfaces Centronic Cable Interface Magnetic Card Stripe Encoder AppendixIntroduction Media Loading Orientation Magnetic Encoder Cleaning ISO Standard EncodingSmart Card Contact Station Appendix BSmart Card Pins Contact Points Smart Card Contact Station InterfaceAccessories & Supplies Ribbons for Printing onlyRibbons for Printing and Lamination Printing Station Cards for Printing only Cards for Printing and LaminationPatches for Lamination Documentation Cleaning SuppliesPrinter supplies MiscellaneousCorporate Headquarters Zebra Technologies Corporation Eltron Card Printer ProductsZebra Technologies Corporation