Zebra Technologies P520 user manual Technical SPECIFICATIONS6, General

Page 44

TECHNICAL SPECIFICATIONS6

General	• High speed printing & laminating
	YMCK & 1.0 mil lamination 110 cards per hour
	YMCK & 0.6 mil lamination 120 cards per hour
	YMCK-K & 1.0 mil lamination 95 cards per hour
	YMCK-K & 0.6 mil lamination 105 cards per hour
	• Small footprint
	• Windows Drivers for 95/98/2000 and NT 4.0
	• One year printer warranty
	• One year print head warranty`
Color Printing	• Color dye sublimation or monochrome thermal
	transfer printing
	• 300 dpi (11.8 dots/mm) print resolution
	• Edge to edge printing standard
Bar Code	• Code 39
	• Code 128 B & C with & without check digit
	• 2 of 5 & 2 of 5 industrial
	• UPCA
	• EAN8 &EAN13
	• PDF 417 2D bar code and other symbologies
	available via Wincard Classic utility tool (option)
Fonts	• Resident: Arial Normal 100, Arial Bold 100
	• True Type fonts available via Windows Driver
Cards	• Types PVC, Composite
	• Card width/length: ISO CR-80 - ISO 7810,
	2.125” (54mm) by 3.375” (86mm)
	• Option: Magnetic Stripe - ISO 7811
	• Option: Smart Card - ISO 7816-2
	• Card thickness: 10mil (0,25mm) to 50mil (1,25mm) for
	printing only and 0,8mm for printing and lamination.
	• Card Feeder capacity: up to 300 cards (10mil), up to
	100 cards (30mil)
	• Card Output Hopper capacity: 300 cards (10mil),
	up to 100 cards (30mil)

TECHNICAL SPECIFICATION 39

Image 44

Contents User’s Manual P520 For USA and Latin America For Europe, Asia and PacificWarranty Information European Council Directive Compliance to StandardsPower Cord Thank you for choosing the Eltron P520 Plastic Card PrinterSmart Card Magnetic EncoderIcons Table of Contents Appendix a Getting STARTED1 Unpacking your card printerGetting Started Indicators and Control Printer Installation Printer Features OPERATION2Loading Printing Ribbons Operation Loading Lamination Patch Loading Cards Card FeederInstall Card Cleaning Cartridge OperationCard Output Hopper Card Thickness Control LeverCard thickness Rejected Card Box When to MaintainHOW to Maintain Operation Feeding one card at a time Printing a Test Card Front Side Printer Operation Back Side Laminator OperationPrinter Menu Information Menu Button NEXTleft Clear Button SELECTrightPrinter Defaults Print ParametersMenu Tree Printing station continuation Patch Clear FirmwareOff st +100 Peel offPrinting a Sample 3CARD Printing a Sample Card To install the P520 Printer Driver in windows 2000/NT4.0 Set Printer Driver OptionsPrinting a sample card Front Side Back SideCLEANING4 Protect Your Factory WarrantyHOW to Clean Cleaning SystemWhen to Clean Cleaning the Print Head Cleaning the Laminator Rollers Card Cleaning Cartridge Cleaning TROUBLESHOOTING5 Interpreting LCD Display messagesScreen Message Meaning Action Printing Black Reject BOX Full About the Laminator Station Print Quality Issues SolutionPrinting shows blurry printed image. Possible Cause No printing on the card Technical SPECIFICATIONS6 GeneralCard Dimensions Interfaces Centronic Cable Interface Introduction AppendixMagnetic Card Stripe Encoder Media Loading Orientation Magnetic Encoder Cleaning ISO Standard EncodingSmart Card Contact Station Appendix BSmart Card Pins Contact Points Smart Card Contact Station InterfaceAccessories & Supplies Ribbons for Printing onlyRibbons for Printing and Lamination Printing Station Patches for Lamination Cards for Printing and LaminationCards for Printing only Cleaning Supplies Printer suppliesDocumentation MiscellaneousZebra Technologies Corporation Zebra Technologies Corporation Eltron Card Printer ProductsCorporate Headquarters