Zebra Technologies 170PAX2TM manual Introduction, Zebra 170PAX2 Print Engine, Getting Started

Page 5

Introduction

Congratulations! You have just purchased a high-quality thermal demand print engine manufactured by the industry leader in quality, service, and value. For over 25 years, Zebra Technologies Corporation has provided customers with the highest caliber of products and support.

To create and print label formats, refer to the ZPL II Programming Guide (part # 46530L). This guide is available by contacting your distributor or Zebra Technologies Corporation. It is also available as a file to download from Zebra’s web site “support.zebra.com”. In addition, label preparation software is available. Contact your distributor or Zebra Technologies Corporation for further information.

The Zebra 170PAX™-Series Maintenance Manual (part # 49803L) contains the information you may need to properly maintain the print engine.

Zebra 170PAX2 Print Engine

This user’s guide contains information specific to the 172PAX2 (203 dot/inch) and the 173PAX2 (300 dot/inch) print engines manufactured by Zebra Technologies Corporation. Each of these print engines is available in either a right hand configuration (media moves from left to right) or a left hand configuration (media moves from right to left.)

Getting Started

Unpacking

Save the carton and all packing materials in case shipping is required.

Inspect the print engine for possible shipping damage:

•Check all exterior surfaces for damage.

•Raise the front cover and inspect for damage.

Reporting Damage

If you discover shipping damage:

•Immediately notify the shipping company and file a damage report.

•Retain the carton and all packing material for inspection.

•Notify your local Zebra distributor of the damage.

Zebra Technologies Corporation is not responsible for any damage incurred during shipment of the print engine and will not cover the repair of this damage under its warranty policy. Any damage claim should be filed with the shipping company.

For shipping information, refer to Appendix A.

Print Engine Mounting

For specific information on mounting the print engine into an applicator, refer to Appendix E.

Communications

Refer to Figure 1. The 170PAX2™-Series printer comes standard with both an Electronics Industries Association (EIA) RS-232 serial interface (DB-25 Connector) and a Centronics®-compatible parallel interface. The serial interface is also configured for both RS-422/RS-485 single drop and RS-485 multi-drop serial interfaces.

Any of these four interface methods may be used to send commands and label formats from a host to the print engine. Only the RS-232 serial interface may be used to send printer status back to the host.

170PAX2-Series User’s Guide

1

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Zebra 170PAX2 -Series User ’s Guide Product Improvements Proprietary StatementFCC Compliance Statement Canadian DOC Compliance StatementContents 170PAX2-Series User’s Guide OptionsZebra 170PAX2 Print Engine IntroductionGetting Started Print Engine MountingCable Connections Printer PowerMedia Loading Media & Ribbon LoadingMedia Loading Left-Hand Units Right Hand Units Ribbon LoadingLeft Hand Units Removing Used RibbonTransmissive Media Sensor Media Sensor PositionReflective Media Sensor 170PAX2-Series User’s Guide Front Panel Keys Power On/Off SwitchPrinter Operation Control Panel Keys Front Panel Indicator Lights LEDsLiquid Crystal Display Entering the Program Mode Configuration and CalibrationChanging Password-Protected Parameters Leaving the Program ModeSetting Darkness Configuration ProcessSetting Print Parameters Selecting the Print Mode Setting the Tear Off PositionSelecting the Media Type Selecting the Sensor TypeSelecting the Print Method Setting the Print WidthSetting the Maximum Label Length Label Feed Listing Printer Information Initialize Card Sensor Profile Media and Ribbon Sensor CalibrationMedia and Ribbon Calibration Setting the Host Port Setting Communication ParametersSetting the Baud Rate Setting the Data BitsSetting the Stop Bits Setting the ParitySetting the Host Handshake Setting the ProtocolSetting the Communications Mode Setting the Network IDControl Prefix Character Selecting Prefix and Delimiter CharactersFormat Prefix Character Delimiter CharacterSetting Ribbon Tension Selecting ZPL ModePower Up and Head Close Parameters Media Power UpBackfeed Sequence Label Positioning ParametersHead Close Label Top Position Setting the Label Top PositionLeft Position 170 PAX2-Series User’s Guide Setting the Left PositionVerifier Port Head Test FunctionHead Resistance Applicator Port Setting the Applicator PortPrinting Controls Setting the Start Print SignalSetting the Resync Mode Sensor Values Selecting the Ribbon Low FeatureReprint Mode Selecting the Liquid Crystal Display LCD Language LCD AdjustPrinter Language Cleaning Care & AdjustmentsCleaning the Exterior Cleaning the InteriorSensor Locations Right-Hand Unit Shown Cleaning the Printhead and Platen RollerToggle Positioning Printhead Pressure AdjustmentPrinthead Pressure Right-Hand Unit Shown Power On Self Test TroubleshootingPrinter Troubleshooting Power On TroubleshootingFor Thermal Transfer For Direct ThermalStoring Bitmap Explanation of Errors Creating BitmapBuilding Format Storing FormatFirst calibrate the printer, then CC , CT , and CD Introduction Cancel Key Self TestPrinter Self Tests Pause Key Test Sample Printout 170PAX2-Series User’s Guide Pause Key Self TestFeed Key Self Test Feed Key Self TestParameter Controlled by Feed Key and Pause KeyResults of Communications Diagnostic Test Communications Diagnostics TestSingle In-line Memory Module Simm OptionsCommunication Interfaces ZebraNet Micro Print Server MPS170PAX2-Series User’s Guide Media Specifications Printer SpecificationsRibbon Specifications Printing ConsiderationsBar Codes Communications SpecificationsZebra Programming Language ZPL Standard Printer Fonts Physical MemoryElectrical FusesPower Fuse Replacement AC Power Cord RequirementsAC Power Cord Specifications Appendix aShipping Installing a FusePrinter Communications Interface Technical Information Appendix BSystem Considerations Interface ConsiderationsRS-232/RS-422/RS-485 Pinouts RS-232/RS-422/RS-485 Serial Data PortPin to 25-Pin Interconnecting Cable RS-422/RS-485 Interconnecting Cable Centronics-Compatible Parallel Data Port Cabling Requirements Applicator Interface ConnectorDB-15 Connector Printer to Applicator See the Configuration and Calibration section Fuse 1 JP1 JP2 Appendix C Ascii Code Chart170PAX2-Series User’s Guide Appendix D Adjusting Darkness For In-Spec Bar CodesBar Code Darkness Comparison In-SpecAppendix E Installation InformationFront View of Right Hand Printer 451 748 11.45 mm 222.2 mm 170PAX2-Series User’s Guide Glossary Glossary Printer configuration See configuration 170PAX2-Series User’s Guide Index Index Index Page Page Zebra Technologies Corporation

170PAX2TM specifications

Zebra Technologies, a leader in industrial printing solutions, offers the 170PAX2TM printer, a versatile and robust solution targeted towards high-performance applications. Designed for industrial environments, the 170PAX2TM stands out for its advanced features and technologies that elevate operational efficiency and streamline workflows.

One of the key features of the 170PAX2TM is its exceptional printing speed. Capable of producing high-quality labels at a rapid pace, this printer significantly reduces the time required for label production, making it an ideal choice for businesses with large-scale printing needs. The printer supports a broad range of media types and sizes, allowing users to create everything from small labels to larger tags with ease.

Another hallmark of the 170PAX2TM is its rugged design. Built to endure the demanding conditions of industrial settings, this printer features a durable housing that can withstand impacts, dust, and moisture. This durability ensures long-term performance and reliability, reducing maintenance costs and downtime.

In addition to its robust build, the 170PAX2TM incorporates state-of-the-art printing technologies. It utilizes direct thermal and thermal transfer printing methods, providing flexibility for various label materials. The printer's advanced thermal printhead technology ensures sharp, clear images and text, which is essential for barcode clarity and scannability.

The 170PAX2TM also boasts user-friendly features, including a large LCD display that simplifies navigation and operation. With intuitive controls, users can easily adjust settings, monitor print jobs, and perform maintenance tasks with minimal training. The printer also supports various connectivity options, including USB, Serial, and Ethernet, making integration into existing systems straightforward.

The device is also designed with energy efficiency in mind. It features power-saving modes that help reduce energy consumption, contributing to a greener, more sustainable workplace. Additionally, its smaller footprint allows it to fit seamlessly into any production line without taking up excessive space.

Overall, Zebra Technologies' 170PAX2TM printer combines speed, durability, and advanced printing capabilities, making it an invaluable asset for businesses looking to enhance their labeling processes. Whether in warehousing, manufacturing, or distribution, the 170PAX2TM delivers dependable performance that meets the high demands of today's industrial environments.
Top Page Image Contents