Zebra Technologies 170PAX2TM Memory, Physical, Electrical, Fuses, Environmental Operating Range

Page 56

Printer Specifications

Memory

°1 MByte RAM standard

Optional 8 MByte SIMM Option available for longer labels

or additional storage of fonts, graphics, logos, and label formats

°Type II Series C & D PC Card Interface (memory only) standard Optional 8 MByte PC Memory Card - available for additional storage of fonts, graphics, logos,templates, and label formats. Also available pre-programmed with optional and international scalable fonts.

°Additional fonts available on Optional EPROMs

Physical

Height

11.8” (300 mm)

 

 

 

Width

9.6”

(245 mm)

Depth

17.0”

(432 mm)

Weight

32 lbs. (14.5 kg)

 

 

 

°For installation information, refer to Appendix E.

Electrical

°Dual 32-bit RISC and CISC microprocessors

°Universal Power Supply with power-factor correcting 90-264 VAC, 48-62 Hz

° Power consumption: Idle

= 19 W

Printing = 220 W (printing Pause

Test label at speed A)

°Agency approvals: UL 1950 3rd edition, CSA 22.2 950-95, EN60950 (IE 950), FCC (Class A), DOC (Class A), EN55022 (CISPR) (Class A), EN50082-2, AS/NZS 3548

°CE, and FCC Class “A” approved

Fuses

°5 Amp, 250 VAC, 5 x 20 mm IEC style, as supplied with the printer

Environmental Operating Range

Operating

 

temperature

41° F to 104° F (5° C to 40° C)

Thermal transfer

Direct thermal

32° F to 104° F (0° C to 40° C)

 

 

Non-condensing

 

relative humidity

 

Operation

20% to 85%

Storage

5% to 85%

 

 

Storage temperature

-40°F to 140° F (-40°C to 60° C)

 

 

*Media registration and minimum label length are affected by media type and width, ribbon type, and print speed. Performance improves as these factors are optimized. Zebra recommends always qualifying any application with thorough testing.

52

170PAX2-Series User’s Guide

Page 55 Page 57
Image 56
Page 55 Page 57
Contents Zebra 170PAX2 -Series User ’s Guide Proprietary Statement Product ImprovementsFCC Compliance Statement Canadian DOC Compliance StatementContents Options 170PAX2-Series User’s GuideIntroduction Zebra 170PAX2 Print EngineGetting Started Print Engine MountingPrinter Power Cable ConnectionsMedia & Ribbon Loading Media LoadingMedia Loading Left-Hand Units Ribbon Loading Right Hand UnitsRemoving Used Ribbon Left Hand UnitsTransmissive Media Sensor Media Sensor PositionReflective Media Sensor 170PAX2-Series User’s Guide Front Panel Keys Power On/Off SwitchPrinter Operation Control Panel Keys Front Panel Indicator Lights LEDsLiquid Crystal Display Configuration and Calibration Entering the Program ModeChanging Password-Protected Parameters Leaving the Program ModeSetting Darkness Configuration ProcessSetting Print Parameters Setting the Tear Off Position Selecting the Print ModeSelecting the Media Type Selecting the Sensor TypeSelecting the Print Method Setting the Print WidthSetting the Maximum Label Length Label Feed Listing Printer Information Initialize Card Media and Ribbon Sensor Calibration Sensor ProfileMedia and Ribbon Calibration Setting Communication Parameters Setting the Host PortSetting the Baud Rate Setting the Data BitsSetting the Parity Setting the Stop BitsSetting the Host Handshake Setting the ProtocolSetting the Network ID Setting the Communications ModeSelecting Prefix and Delimiter Characters Control Prefix CharacterFormat Prefix Character Delimiter CharacterSelecting ZPL Mode Setting Ribbon TensionPower Up and Head Close Parameters Media Power UpBackfeed Sequence Label Positioning ParametersHead Close Setting the Label Top Position Label Top PositionSetting the Left Position Left Position 170 PAX2-Series User’s GuideVerifier Port Head Test FunctionHead Resistance Setting the Applicator Port Applicator PortPrinting Controls Setting the Start Print SignalSetting the Resync Mode Sensor Values Selecting the Ribbon Low FeatureReprint Mode Selecting the Liquid Crystal Display LCD Language LCD AdjustPrinter Language Care & Adjustments CleaningCleaning the Exterior Cleaning the InteriorCleaning the Printhead and Platen Roller Sensor Locations Right-Hand Unit ShownPrinthead Pressure Adjustment Toggle PositioningPrinthead Pressure Right-Hand Unit Shown Troubleshooting Power On Self TestPower On Troubleshooting Printer TroubleshootingFor Thermal Transfer For Direct ThermalExplanation of Errors Creating Bitmap Storing BitmapBuilding Format Storing FormatFirst calibrate the printer, then CC , CT , and CD Introduction Cancel Key Self TestPrinter Self Tests Pause Key Self Test Pause Key Test Sample Printout 170PAX2-Series User’s GuideFeed Key Self Test Feed Key Self TestFeed Key and Pause Key Parameter Controlled byCommunications Diagnostics Test Results of Communications Diagnostic TestOptions Single In-line Memory Module SimmCommunication Interfaces ZebraNet Micro Print Server MPS170PAX2-Series User’s Guide Printer Specifications Media SpecificationsRibbon Specifications Printing ConsiderationsBar Codes Communications SpecificationsZebra Programming Language ZPL Standard Printer Fonts Memory PhysicalElectrical FusesAC Power Cord Requirements Power Fuse ReplacementAC Power Cord Specifications Appendix aInstalling a Fuse ShippingAppendix B Printer Communications Interface Technical InformationSystem Considerations Interface ConsiderationsRS-232/RS-422/RS-485 Serial Data Port RS-232/RS-422/RS-485 PinoutsPin to 25-Pin Interconnecting Cable RS-422/RS-485 Interconnecting Cable Centronics-Compatible Parallel Data Port Cabling Requirements Applicator Interface ConnectorDB-15 Connector Printer to Applicator See the Configuration and Calibration section Fuse 1 JP1 JP2 Ascii Code Chart Appendix C170PAX2-Series User’s Guide Adjusting Darkness For In-Spec Bar Codes Appendix DIn-Spec Bar Code Darkness ComparisonInstallation Information Appendix EFront View of Right Hand Printer 451 748 11.45 mm 222.2 mm 170PAX2-Series User’s Guide Glossary Glossary Printer configuration See configuration 170PAX2-Series User’s Guide Index Index Index Page Page Zebra Technologies Corporation

170PAX2TM specifications

Zebra Technologies, a leader in industrial printing solutions, offers the 170PAX2TM printer, a versatile and robust solution targeted towards high-performance applications. Designed for industrial environments, the 170PAX2TM stands out for its advanced features and technologies that elevate operational efficiency and streamline workflows.

One of the key features of the 170PAX2TM is its exceptional printing speed. Capable of producing high-quality labels at a rapid pace, this printer significantly reduces the time required for label production, making it an ideal choice for businesses with large-scale printing needs. The printer supports a broad range of media types and sizes, allowing users to create everything from small labels to larger tags with ease.

Another hallmark of the 170PAX2TM is its rugged design. Built to endure the demanding conditions of industrial settings, this printer features a durable housing that can withstand impacts, dust, and moisture. This durability ensures long-term performance and reliability, reducing maintenance costs and downtime.

In addition to its robust build, the 170PAX2TM incorporates state-of-the-art printing technologies. It utilizes direct thermal and thermal transfer printing methods, providing flexibility for various label materials. The printer's advanced thermal printhead technology ensures sharp, clear images and text, which is essential for barcode clarity and scannability.

The 170PAX2TM also boasts user-friendly features, including a large LCD display that simplifies navigation and operation. With intuitive controls, users can easily adjust settings, monitor print jobs, and perform maintenance tasks with minimal training. The printer also supports various connectivity options, including USB, Serial, and Ethernet, making integration into existing systems straightforward.

The device is also designed with energy efficiency in mind. It features power-saving modes that help reduce energy consumption, contributing to a greener, more sustainable workplace. Additionally, its smaller footprint allows it to fit seamlessly into any production line without taking up excessive space.

Overall, Zebra Technologies' 170PAX2TM printer combines speed, durability, and advanced printing capabilities, making it an invaluable asset for businesses looking to enhance their labeling processes. Whether in warehousing, manufacturing, or distribution, the 170PAX2TM delivers dependable performance that meets the high demands of today's industrial environments.
Top Page Image Contents