Channel Wiring P200-2, Operation, Punch EQ

INSTALLATION

2-Channel Wiring P200-2	INPUT	P400-2
P300-2	INPUT	P500-2	PASS-THRU

INPUT

OPERATION

REMOTE PUNCH EQ (Option)

NOTE:Previous (prior to 2007) Punch Bass and Para-

Punch remotes will not work with these amplifiers.

NOTE:Use the instructions that came with the remote for a variety of mountings that fit your preference.

Quick Install		+20
1.	Using the screws supplied, install the mounting clip.	+18
1.	Using the screws supplied, install the mounting clip.	+16
2. Slip the remote onto the mounting clip until it snaps		+14
2. Slip the remote onto the mounting clip until it snaps		+12
	into place.	+10
3.	Route and connect the cable to the remote and	+8
3.	Route and connect the cable to the remote and	+6
	dB	+4
	amplifier.	+2
Operation		-0
Operation		20	50	100	200	500	1k	2k	5k	10k	20k
		-2
			Bass			Hz				Treble

6.Operation works the same as Punch EQ, see below.

NOTE:Connecting the optional remote overrides the Punch EQ control on the amplifier.

CAUTION:Overexcursion and subsequent damage may occur at high levels of boost.

PUNCH EQ

This works along with the crossover switch on the amplifier. When set to Low-Pass (LP) operation,this is a variable Bass Boost.

When set to High-Pass (HP) operation,this is a variable Mid-Bass andTreble Boost. When set to All Pass (AP) operation,both the Bass andTreble frequencies are boosted. Set this to your personal preference while listening to the system.

NOTE:Connecting the optional remote overrides the Punch EQ control on the amplifier.

ADJUSTING CROSSOVER FREQUENCY

Placing the crossover switch in the HP position sets the amplifier to the High Pass mode, enabling frequencies above the cut-off point to pass, adjustable between 50-500Hz.

Placing the crossover switch in the AP position sets the amplifier to the All Pass mode, preventing any crossover adjustment, allowing all frequencies to pass.

Placing the crossover switch in the LP position sets the amplifier to the Low Pass mode, enabling frequencies below the cut-off point to pass, adjustable between 50-500Hz.

Turn the crossover adjustment knob all the way down.With the system playing, turn the crossover adjustment knob up slowly until the desired crossover point is achieved.

p3002 specifications

The Rockford Fosgate P3002 is a high-performance two-channel amplifier that stands out in the competitive world of car audio systems. Renowned for its power and sound quality, this amplifier is designed to deliver robust performance for both casual listeners and audiophiles alike.

One of the key features of the P3002 is its compact size. Measuring just 9.25 inches in width, it can easily fit in tight spaces without compromising the audio output. Designed with versatility in mind, it can be used to power a pair of speakers or an entire sound system. The amplifier offers a power output of 50 watts RMS per channel at 4 ohms, and it can deliver 75 watts RMS per channel at 2 ohms. This flexible power rating allows users to choose the ideal configuration for their specific audio setup.

The P3002 integrates advanced technologies that enhance both performance and reliability. One standout feature is the built-in thermal protection circuit, which ensures that the amplifier operates efficiently even under high load conditions. This helps prevent damage from overheating, prolonging the amplifier’s lifespan. Additionally, it includes short-circuit and over-voltage protection, making it a reliable choice for car audio systems.

Sound quality is paramount, and the P3002 does not disappoint. It features high and low-pass crossover settings, allowing users to tailor their sound experience. This flexibility lets audiophiles focus on their preferred frequencies, whether they want deep bass or crisp highs. Furthermore, with a signal-to-noise ratio of 80dB, it minimizes unwanted noise and distortion, ensuring a clean and powerful audio experience.

Durability is another hallmark of the P3002, with a chassis designed to withstand the rigors of daily use. Its sleek silver finish not only enhances aesthetics but also promotes heat dissipation. The amplifier’s RCA inputs make integration with factory systems straightforward, providing versatility for installation.

With a perfect combination of features, technologies, and characteristics, the Rockford Fosgate P3002 amplifier is a compelling choice for anyone looking to enhance their car audio experience. Its strong build quality, impressive power output, and sound customization options make it a standout in its category. Whether you’re a casual listener or a serious enthusiast, the P3002 is designed to elevate your music enjoyment on the road.