Nortel Networks P0607274 0 manual Preface, Display Tips

Page 11

11

Preface

This guide describes how to install, initialize and monitor the Business Communications Manager Uninterruptable Power Supply (UPS) device.

Information in these chapters explains:

•how to set up the UPS

•how to start and initialize the UPS

•how to test and monitor the UPS

Display Tips

You can read this publication from your computer monitor or printed hard copy. For best on-screen display results, use Adobe Acrobat Reader* version 4.0 or 5.0.

If you use Adobe Acrobat Reader, version 4.0, perform the following steps to optimize the illustrations:

•Increase display magnification.

•Print the document.

For Adobe Acrobat Reader, version 5.0, perform the following steps to optimize the graphical display:

1Start the Adobe Acrobat Reader version 5.0 application.

2From the top line menu, select: Edit -->Preferences-->General.

3Select Display from the Preferences menu at the left side of the setup screen.

4Select the following smoothing options from the Display setup screen:

•Smooth Text

•Smooth Line Art

•Smooth Images

See Figure 1 on page 12 to review Acrobat Reader version 5.0 display selections.

UPS Installation and Configuration Guide

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Part No. P0607274 March 24 North American Regulatory Information SafetyElectromagnetic Compatibility Radio-frequency InterferenceTelecommunication Registration Canadian Regulations please read carefully Telephone Company RegistrationRights of the Telecommunications Company RepairsFederal Communications Commission FCC Notice US Regulations please read carefullyImportant Safety Instructions Use Risk of shock Preface P0607274 Display Tips PrefaceAcrobat Reader display setup selections Symbols used in this guideRelated publications How to Get HelpText conventions Preface P0607274 UPS Overview Chapter Uninterruptable Power Supply UPS OverviewBCM Input Power Source BCM and UPS power and control connectionsUPS threshold values Alarm and event reportingUPS Event messages Uninterruptable Power Supply UPS Overview UPS Event messages Operational measurements and accounting UPS default configuration settingsShutdown Uninterruptable Power Supply UPS Overview P0607274 Initialize the serial port Install and Initialize the UPSUPS Configuration screen UPSConsoleToggle ServiceEnable UPSConsoleToggle Enable the console batch file Monitor the UPS Chapter Monitor the Uninterruptable Power SupplyUPS Status Monitor screen Access the UPS Status monitorUPS OMs report Access the UPS OM and log reportsUPS Log file report Access the UPS status reportUPS status report Test the UPSMonitor the Uninterruptable Power Supply
Top Page Image Contents