7
Use
When using your UPS equipment, basic safety precautions should always be followed to reduce risk of fire, electric shock and injury to persons, including the following:
1Read and understand all instructions.
2Follow the instructions marked on the product.
3Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
4Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool.
5Do not place this product on an unstable cart, stand or table. The product may fall, causing serious damage to the product.
6This product should never be placed near or over a radiator or heat register. This product should not be placed in a
7Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused by persons walking on it.
8Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock.
9Never spill liquid of any kind on the product.
10To reduce the risk of electric shock do not disassemble this product, but have it sent to a qualified service person when some service or repair work is required.
11Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a When the power supply cord or plug is damaged or frayed.
b If the product has been exposed to rain, water or liquid has been spilled on the product, disconnect and allow the product to dry out to see if it still operates; but do not open up the product.
c If the product housing has been damaged.
d If the product exhibits a distinct change in performance.
12Caution: To eliminate the possibility of accidental damage to cords, plugs and jacks, do not use sharp instruments during the assembly procedures.
13Save these instructions.
UPS Installation and Configuration Guide