Nortel Networks P0607274 0 manual Install and Initialize the UPS, Initialize the serial port

Page 23

23

Chapter 2

Install and Initialize the Uninterruptable Power Supply

This chapter describes how to install and initialize the Uninterruptable Power Supply (UPS) on the Business Communications Manager (BCM) 200, 400, and 1000 models.

This chapter describes the following:

•Install and Initialize the UPS on page 23

•UPSConsoleToggle Service on page 24

Install and Initialize the UPS

Use this procedure to install and power up the Business Communications Manager through the UPS. Refer also to the UPS product installation manual for detailed instructions.

1Plug the UPS power cord into the AC power source (wall outlet).

2Plug the BCM power cord into the UPS.

3Connect the serial cable from the Business Communications Manager to the UPS.

4Ensure you have a LAN connection from the Business Communications Manager to the Unified Manager workstation.

5Power-up the UPS.

6Power-up the Business Communications Manager.

7Wait for the Business Communications Manager to finish boot-up.

8This procedure is complete.

Initialize the serial port

The Unified Manager provides a means to modify the serial port configuration and UPS service settings. When you enable the UPS device using the Unified Manager interface, Unified Manager turns the console service OFF and turns the UPS service ON. Conversely, if the UPS serial cable is disconnected, the BCM Unified Manager turns the console service ON and turns the UPS service OFF.

Use this procedure to initialize the UPS serial port:

1Connect the serial cable from the BCM to the UPS.

2Access the correct Business Communications Manager in your network from the Unified Manager workstation browser.

3Select the Services key from the Unified Manager main page and expand the navigation tree. A list of available services appears in the Services information frame.

4Select the UPS heading from the navigation tree window.

UPS Installation and Configuration Guide

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Part No. P0607274 March 24 North American Regulatory Information SafetyElectromagnetic Compatibility Radio-frequency InterferenceTelecommunication Registration Canadian Regulations please read carefully Telephone Company RegistrationRights of the Telecommunications Company RepairsFederal Communications Commission FCC Notice US Regulations please read carefullyImportant Safety Instructions Use Risk of shock Preface P0607274 Display Tips PrefaceAcrobat Reader display setup selections Symbols used in this guideRelated publications How to Get HelpText conventions Preface P0607274 UPS Overview Chapter Uninterruptable Power Supply UPS OverviewBCM Input Power Source BCM and UPS power and control connectionsUPS threshold values Alarm and event reportingUPS Event messages Uninterruptable Power Supply UPS Overview UPS Event messages Operational measurements and accounting UPS default configuration settingsShutdown Uninterruptable Power Supply UPS Overview P0607274 Initialize the serial port Install and Initialize the UPSUPS Configuration screen UPSConsoleToggle ServiceEnable UPSConsoleToggle Enable the console batch file Monitor the UPS Chapter Monitor the Uninterruptable Power SupplyUPS Status Monitor screen Access the UPS Status monitorUPS OMs report Access the UPS OM and log reportsUPS Log file report Access the UPS status reportUPS status report Test the UPSMonitor the Uninterruptable Power Supply
Top Page Image Contents