Nortel Networks P0607274 0 manual Test the UPS, UPS status report

Page 31

Chapter 3 Monitor the Uninterruptable Power Supply 31

Figure 7 UPS status report

7To print the report, select Print this Report from the screen.

8To close the report window, select Close This Window from the screen.

9This procedure is complete.

Test the UPS

Use this procedure to test the UPS power backup function after you have installed and configured the UPS for the Business Communications Manager.

The UPS device automatically performs a biweekly self-test. Locate the test results under the following path:

F:\Program Files\PwerChute\PwrChute.log file.

1Ensure that the serial cable between the Business Communications Manager and the UPS (or the expansion chassis) is securely connected at both ends.

2Simulate a power failure. Disconnect the power cord from the AC power source (wall outlet) to the UPS device.

3Verify that the BCM connected to the UPS device remains operational

UPS Installation and Configuration Guide

Image 31

Contents Part No. P0607274 March 24 North American Regulatory Information SafetyTelecommunication Registration Radio-frequency InterferenceElectromagnetic Compatibility Canadian Regulations please read carefully Telephone Company RegistrationRights of the Telecommunications Company RepairsFederal Communications Commission FCC Notice US Regulations please read carefullyImportant Safety Instructions Use Risk of shock Preface P0607274 Display Tips PrefaceAcrobat Reader display setup selections Symbols used in this guideText conventions How to Get HelpRelated publications Preface P0607274 UPS Overview Chapter Uninterruptable Power Supply UPS OverviewBCM Input Power Source BCM and UPS power and control connectionsUPS threshold values Alarm and event reportingUPS Event messages Uninterruptable Power Supply UPS Overview UPS Event messages Operational measurements and accounting UPS default configuration settingsShutdown Uninterruptable Power Supply UPS Overview P0607274 Initialize the serial port Install and Initialize the UPSUPS Configuration screen UPSConsoleToggle ServiceEnable UPSConsoleToggle Enable the console batch file Monitor the UPS Chapter Monitor the Uninterruptable Power Supply UPS Status Monitor screen Access the UPS Status monitorUPS OMs report Access the UPS OM and log reportsUPS Log file report Access the UPS status reportUPS status report Test the UPSMonitor the Uninterruptable Power Supply