Nortel Networks P0607274 0 manual Enable UPSConsoleToggle

Page 25

Chapter 2 Install and Initialize the Uninterruptable Power Supply 25

After 15 minutes, the service switches back to the UPS to enable the UPS (if the UPS was originally selected and enabled).

•To extend the Console time, stop the UPSConsoleToggle using the command “Net Stop UPSConsoleToggle”.

•The UPS service needs to be enabled from the Unified Manager when the user ends the console session.

Enable UPSConsoleToggle

Use this procedure to enable the UPSConsoleToggle service.

1Wait for all services to be up and running.

2Verify that the UPS service is running.

3If UPS service is running, change its start-up type to Manual-Start and the console CMDRMT service to Auto-Start, then stop UPS service and start Console service.

4Wait for 15 minutes.

5Toggle the UPS/Console.

6Change the console start-up type to Manual-Startand the UPS to Auto-Start. This stops the console service and starts the UPS service.

7Stop the UPSConsoleToggle service.

8This procedure is complete.

UPS Installation and Configuration Guide

Image 25

Contents Part No. P0607274 March 24 North American Regulatory Information SafetyTelecommunication Registration Radio-frequency InterferenceElectromagnetic Compatibility Rights of the Telecommunications Company Telephone Company RegistrationRepairs Canadian Regulations please read carefullyFederal Communications Commission FCC Notice US Regulations please read carefullyImportant Safety Instructions Use Risk of shock Preface P0607274 Display Tips PrefaceAcrobat Reader display setup selections Symbols used in this guideText conventions How to Get HelpRelated publications Preface P0607274 UPS Overview Chapter Uninterruptable Power Supply UPS OverviewBCM Input Power Source BCM and UPS power and control connectionsUPS threshold values Alarm and event reportingUPS Event messages Uninterruptable Power Supply UPS Overview UPS Event messages Operational measurements and accounting UPS default configuration settingsShutdown Uninterruptable Power Supply UPS Overview P0607274 Initialize the serial port Install and Initialize the UPSUPS Configuration screen UPSConsoleToggle ServiceEnable UPSConsoleToggle Enable the console batch file Monitor the UPS Chapter Monitor the Uninterruptable Power SupplyUPS Status Monitor screen Access the UPS Status monitorUPS OMs report Access the UPS OM and log reportsUPS Log file report Access the UPS status reportUPS status report Test the UPSMonitor the Uninterruptable Power Supply