Dell DCSM specifications Removing the Drive-Panel Insert, Replacing the Drive-Panel Insert

Page 23

3.By pushing from the inside and pivoting the drive panel to the left, you can release the drive panel from its side hinges.

4.Set the drive panel aside in a secure location.

Removing the Drive-Panel Insert

1drive panel tabs

2drive panel

3drive panel insert

1.On the inside of the drive panel, gently press the two drive-panel insert tab inward.

2.Pivot the drive-panel insert outward.

3.Set the drive-panel insert aside in a secure location.

Replacing the Drive-Panel Insert

1drive panel tabs

2drive panel

3drive panel insert

1.Align the tabs slots with the drive-panel insert tabs and seat the drive panel insert under the right edge.

2.Rotating inward toward the drive panel, align and snap the drive-panel insert into place on the drive panel.

3.Ensure that the drive-panel insert is correctly seated in the drive panel.

Replacing the Drive Panel

1. Follow the procedures in "Before you Begin."

Image 23

Contents Abbreviations and Acronyms Front View of Computer About Your Dell Dimension 5000 ComputerLights Back View of ComputerBack to Contents Starting the Dell Diagnostics From Your Hard Drive Advanced TroubleshootingDell Diagnostics When to Use the Dell DiagnosticsOption Function Dell Diagnostics Main MenuPower Light Problem Description Suggested Resolution System LightsLight Pattern Problem Description Suggested Resolution Diagnostic LightsCode Cause Beep CodesBack to Contents Turning Off Your Computer Before You BeginGetting Started Recommended ToolsBack to Contents Replacing the Computer Cover Removing the Computer Cover DDR2 Memory Overview Removing and Installing PartsMemory Installing Memory Addressing Memory With 4-GB ConfigurationsPCI Cards CardsRemoving Memory Installing a PCI Card Removing a PCI Card PCI Express Cards Installing a PCI Express CardPage Removing a PCI Express Card Removing the Drive Panel Drive PanelsReplacing the Drive Panel Removing the Drive-Panel InsertReplacing the Drive-Panel Insert Drives Connecting and Disconnecting Drive Cables Connecting Drive CablesDrive Interface Connectors Power Cable ConnectorRemoving a Hard Drive Hard DriveAdding a Second Hard Drive Installing a Hard DriveRemoving a Floppy Drive Floppy DriveInstalling a Floppy Drive Replace the computer cover Removing a Media Card Reader Media Card ReaderRemove the computer cover Installing a Media Card ReaderRemoving a CD/DVD Drive CD/DVD DriveInstalling a CD/DVD Drive Replace the computer cover Removing the Processor ProcessorInstalling the Processor System Board Removing the System Board Jumper SettingsJumper Setting Description Replacing the System Board Power SupplyRemoving the Power Supply Replacing the Power Supply Replacing the Battery BatterySpecifications Controls and Lights ConnectorsDrives Environmental PowerPhysical Overview System SetupEntering System Setup System Setup ScreensCOM3 System Setup OptionsPXE. When the On w/ PXE setting is active USB, Internal, or Read OnlyAre every day or every Monday through Friday System Password optionChanging Boot Sequence for Future Boots Boot SequenceOption Settings Changing Boot Sequence for the Current BootClearing Cmos Settings Clearing Forgotten PasswordsBack to Contents Inside View of Your Computer System Board Components Technical OverviewDC Power Connector P1 Power Supply DC Connector Pin AssignmentsCOM Pin Number Signal Name 18-AWG WireAbbreviations and Acronyms

Related manuals

Manual 217 pages 3.31 Kb

Manual 158 pages 23.31 Kb

Manual 72 pages 7.23 Kb