NOTE: If you are installing a new CD/DVD drive rather than replacing a drive, remove the drive panel inserts and slide the drive into place. Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.
1drive
2screw (3)
4.Connect the power and data cables to the drive.
1data cable
2power cable
5.Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.
6.Replace the computer cover.
7.Replace the drive panel.
NOTICE: To connect a network cable, first plug the cable in to the network device and then plug the cable in to the computer.
8.Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
9.Enter system setup and select the appropriate Drive option.