1sliding plate lever
2sliding plate
3Media Card Reader
6.While pushing on the back of the drive, remove the Media Card Reader by sliding and holding the drive latch release downward.
7.Replace the drive panel.
8.Replace the computer cover.
Installing a Media Card Reader
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface on the computer chassis.
1. Follow the procedures in "Before you Begin."
1Media Card Reader
2screw (3)
2.Lay the computer on its side so that the system board is on the bottom of the inside of the computer.
3.Remove the computer cover.
4.Remove the drive panel.