Intermec manual To set up the PB50 for wireless communications, Parameter Default Setting

Page 39

Chapter 2 — Configuring the PB50

The PB50 supports these authentication modes: none, WEP, WPA Personal and Enterprise mode (802.1x authentication), WPA2 Personal and Enterprise mode (802.1x authentication).

Note: WPA and WPA2 Enterprise mode currently support PEAP, TTLS, and LEAP. For LEAP authentication, the PB50 supports Open EAP, but does not support Network EAP.

To set up the PB50 to work in your wireless network, you will need:

•Serial cable (P/N 075497-001)

•Host PC running Windows or Linux

•Serial port software such as HyperTerminal

Note: If you are using IPL commands with HyperTerminal, you may want to be able to see the commands as you type them on your screen. For help, see “Changing Configuration Settings Using the Command Line” on page 25.

To set up the PB50 for wireless communications

1Connect the 8-pin circular DIN connector to the serial port on the PB50.

2Connect the other end of the serial cable to a serial port on the back of your PC or to a serial adapter on your mobile computer.

3Open HyperTerminal on your PC and configure the following parameters for the serial port:

Parameter

Default Setting

 

 

Baud rate

115200

 

 

Data bits

8

 

 

Parity

None

 

 

Stop bits

1

 

 

PB50 Mobile Label and Receipt Printer User’s Guide

29

Page 38 Page 40
Image 39
Page 38 Page 40
Contents User’s Guide PB50 Mobile Label and Receipt Printer User’s Guide Version Number Date Document Change RecordPB50 Mobile Label and Receipt Printer User’s Guide Contents Specifications Accessories for the PB50 Before You Begin Safety InformationGlobal Services and Support Warranty InformationWeb Support Telephone Support Service Location SupportWho Should Read This Manual Related DocumentsTo download documents Before You Begin Using the PB50 Mobile Label and Receipt Printer What’s New? Learning About the PB50 PrinterUnderstanding the Printer Firmware Identifying the Parts of the PrinterUnderstanding How to Use the PB50 Buttons Understanding the Control PanelButton Name Button Function Understanding the Soft Keys Button Name FunctionButton Soft Keys Description Understanding the Printer Sounds Understanding the Ready-to-Work IndicatorIndicator State Description Understanding the Printer SoundsManaging Power on the PB50 Using the Batteries Installing the BatteryTo install the battery Charging the Batteries To charge the battery inside the PB50Icon Status Understanding the Battery IconsExtending Battery Life Battery Icon StatusTo load media Loading MediaUsing the PB50 Mobile Label and Receipt Printer Using the PB50 Mobile Label and Receipt Printer To load media for self-strip printing Printing a Testprint To print a testprint with a PB50 loaded with IPL firmwareTo print a self test with a PB50 loaded with ESC/P firmware Using the PB50 Mobile Label and Receipt Printer Configuring the PB50 Understanding the Display Modes Configuring the PB50Understanding Ready Mode Understanding Information ModeUnderstanding Setup Mode Understanding Pause ModeUnderstanding Error Mode Editing Settings in Setup ModeEditing Mode To Navigate To Accept Value To enter Test mode Understanding Test ModeTo enter Extended Test mode Options in Extended Test ModeFunction Description Changing Configuration Settings From the Display Changing Configuration SettingsMain Levels of the Setup Menu in Fingerprint Changing Configuration Settings From PrintSet Changing Configuration Settings Using the Command LineTo see IPL commands as you type Changing Configuration Settings From the Printer Home Changing Configuration Settings From SmartSystems ConsoleTo make changes to the configuration Establishing Communications With a Host Setting Up Bluetooth CommunicationsUnderstanding Bluetooth Radio Icons Setting Up 802.11 Radio CommunicationsTo set up Bluetooth communications with a mobile computer To set up Bluetooth communications with a scannerParameter Default Setting To set up the PB50 for wireless communicationsIconDescription Understanding the 802.11 Radio IconsTo configure the printer to use WEP authentication Configuring Wireless Printing Using IPLTo configure the PB50 to use WPA or WPA2 Enterprise mode To configure the printer to use WPA-PSK or WPA2-PSK modeConfiguring Wireless Printing Using Fingerprint Where xxxxxxxxxx is a value between 8 and 64 characters To view the 802.1x values, send this command Setting Up USB Communications Setting Up Serial CommunicationsSerial Port Settings on the PB50 To download firmware updates Upgrading the FirmwareTo connect the PB50 to a PC or mobile computer To upgrade your printer using PrintSet To upgrade your printer using an 802.11 network connectionTo upgrade your printer using a serial connection Downloading Fonts and Graphics Configuring the PB50 Troubleshooting and Maintaining the PB50 Troubleshooting the PB50 Understanding Error MessagesContacting Product Support Error Icon Error Message Description Possible PB50 Error Icons and MessagesTroubleshooting Printer Problems and Finding Solutions Printer Problems and SolutionsProblem Possible Solution For help, see Cleaning the Printer on ProblemUsing the Line Analyzer in Fingerprint Troubleshooting Communication ProblemsUsing Dump Mode in IPL To enter Dump mode using the control panel buttonsTo exit Dump mode using the control panel buttons Cold Booting the PB50 Cleaning the PrinterTo reset the PB50 Printer Part Cleaning Method Cleaning Interval Cleaning the PB50 PrinterTroubleshooting and Maintaining the PB50 Specifications Specifications Media Specifications External Fanfold Media Specifications Supported MediaSensitivity Constant Factor Description Max Print Speed AC18 4-Bay Battery Charger Accessories for the PB50Cart Dock IPL and Fingerprint Setup Menus IPL Setup Menu Fingerprint Setup Menu Chapter B IPL and Fingerprint Setup Menus Page PB50 Mobile Label and Receipt Printer User’s Guide

PB50 specifications

The Intermec PB50 is a compact and versatile mobile printer designed for businesses seeking reliable and efficient printing solutions in various environments. With its lightweight design and robust features, the PB50 caters to mobile workers who require high-quality printing capabilities on the go.

One of the most notable attributes of the PB50 is its thermal printing technology. Utilizing direct thermal printing, this device produces clear and crisp labels, receipts, and tickets without the need for ink or toner. This not only reduces operational costs but also simplifies maintenance, as users can replace thermal paper rolls easily.

The PB50 supports a wide range of media types, including labels, tags, and receipts. It is capable of printing in different widths, making it suitable for various applications across industries, from retail to warehousing and logistics. With a resolution of 203 dpi, users can expect high-quality prints that maintain sharp text and vivid barcodes, ensuring easy scanning and reliability.

Connectivity is another key feature of the Intermec PB50. The printer comes with multiple connectivity options, including Bluetooth, WLAN, and USB. This flexibility allows seamless integration into existing systems and enables users to print directly from smartphones, tablets, or other mobile devices. The Bluetooth connectivity enhances the printer's mobility, allowing remote workers to print without the constraints of wired connections.

The PB50 is designed with user-friendliness in mind. It features an intuitive interface with easily accessible buttons for simplified operation. The printer is also equipped with a durable exterior, ensuring that it can withstand the rigors of daily use in demanding environments, such as warehouses or manufacturing floors. Its battery life is impressive as well, providing long operational times between charges to support extended periods of mobile printing.

Additional features of the PB50 include a built-in sensor that detects paper and automatically adjusts the print speed for optimal results. Moreover, the printer can connect to a range of software tools that facilitate print management, enhancing efficiency and productivity.

Overall, the Intermec PB50 is a powerful mobile printing solution designed with modern businesses in mind, offering outstanding print quality, versatile connectivity, and enhanced durability to meet the demands of various industries.
Top Page Image Contents