Chapter 4 Installing option cards and DIMMs 71
4Attach the antistatic wrist strap that was shipped with the VPN Router 2700 (see “Attaching the antistatic wrist strap” on page 64).
Caution: Risk of equipment damage
Electrostatic discharge can damage VPN Router 2700 components.
5To replace a DIMM, remove the installed DIMM as follows:
a Press down the locking lever on either side of the DIMM (Figure 26 on page 72).
b Pull the DIMM up to remove it from the slot.
6Press down the locking lever on either side of the slot where you plan to install the new DIMM (Figure 26 on page 72).
7Place the new or replacement DIMM in the slot (Figure 26 on page 72). Use the alignment keys to properly position the DIMM in the slot.
8Press the DIMM firmly into the socket.
9Pull up the locking lever on either side of the DIMM to snap it into position.