72 Chapter 4 Installing option cards and DIMMs
Figure 26 Installing and removing a DIMM
Alignment keys
To remove DIMMs, pull back locking levers and pull out DIMM.
To install DIMMs, pull back locking levers and push in DIMM.
Locking lever
10Replace the top cover on the chassis (Figure 21 on page 62). a Hold the cover at an angle, and slide it onto the chassis.
b Insert the four screws that secure the cover to the chassis, and use a screwdriver to tighten the screws.
11Do the following to install the VPN Router 2700 in an equipment rack: a Set the VPN Router 2700 on the
b Insert one of the panhead screws through the bottom hole on each side of the shelf into the hole in the rack and tighten the screws.