Nortel Networks 2700 manual 10/100BASE-TX Ethernet interface card

82 Appendix A Technical specifications

The SSL VPN Module 1000 is supported on the VPN Router 5000, 2700, 2750, and 1740 gateways running VPN Router Version 5.0 software. You must install the SSL VPN Module 1000 in slot 1 of the VPN Router 5000, 2700, 2750, or 1740.

The Nortel VPN Router distinguishes between the services that it provides and the services that the SSL VPN Module 1000 provides and immediately forwards the appropriate traffic to the SSL VPN module.

Note: For complete information about the SSL VPN Module 1000 and instructions for configuring it, see Nortel VPN Router Configuration — SSL VPN Services (NN46110-501).

10/100BASE-TX Ethernet interface card

The 10/100BASE-TX Ethernet interface card has a single RJ-45 connector that provides the signals needed to interface to 10BASE-T and 100BASE-TX Ethernet equipment.

Figure 32 shows the 10/100BASE-TX Ethernet interface card.

Figure 32 10/100BASE-TX Ethernet interface card

DATA ACT/LINK 100TX

CS260009A

For information about the cables that you can connect to this interface and the cable pinouts, see “10/100BASE-TX Ethernet LAN port” on page 76.

NN46110-311 02.01