1. Presentation
1.4 Technical data sheet
Functions | Parameters | Characteristics/Default values | Possible values |
|
|
|
|
RS232 Port | ◗Rate | ◗9600 | ◗9600 |
| ◗Data bits | ◗8 | ◗8 |
| ◗Stop bits | ◗1 | ◗1 |
| ◗Parity | ◗None | ◗Even, odd |
RS485 Port | ◗Rate, bits, stop | ◗1200, 8, 1 | ◗See technical support |
| ◗Parity | ◗None | documentation |
| ◗Mode | ◗2 wires | ◗2 wires / 4 wires |
| ◗Master / slave | ◗Master | ◗Master |
| ◗Bias | ◗With | ◗With / without |
| ◗Impedance matching | ◗Without | ◗With / without |
| ◗Cable | ◗0.08 - 0.6 mm2 (28/20 AWG) |
|
Modem | ◗Analogue | ◗V.34/33.6 kbps |
|
|
| ◗Error correction: V.42 LAPM and MNP |
|
|
| ◗Data compression: V.42b and MNP5 |
|
| ◗Country | ◗Works with 39 country profiles |
|
|
| ◗European CTR21 compatibility |
|
| ◗Protection | ◗Line protection included |
|
|
|
|
|
Contact inputs | ◗Dry contacts | ◗Normally open (NO) | ◗NO / NC |
|
| 0.08 - 0.6 mm2 (28/20 AWG) |
|
| ◗Number | ◗2 (card version) | ◗0 to 2 |
|
| ◗2+4 (external version) 0.08 - 0.5 mm2 (28/20 AWG) | ◗0 to 6 |
| ◗Distance | ◗10m maximum |
|
|
|
|
|
Power supply | ◗Voltage | ◗5V DC |
|
(external version) | ◗Current | ◗1A |
|
|
|
|
|
Comment: only MGE UPS SYSTEMS can be connected to the RS485 link.
Page 12 - 34003602EN/AB