MGE UPS Systems 100 Introduction, Environment, Special precautions, Recycling of packaging

Page 3

Introduction

Thank you for selecting an MGE UPS SYSTEMS product to protect your electrical equipment.

PowerServices TelPac has been designed with the utmost care.

It comes in 2 versions: card (ref. 66096) or external (ref. 66097 or 66098).

The card version can be installed by the customer or by an MGE UPS SYSTEMS After Sales Service technician. The external version can only be installed by a specialised MGE UPS SYSTEMS After Sales Service technician. We recommend you take time to read this manual to take full advantage of the many features of this product.

To discover the entire range of MGE UPS SYSTEMS products, visit our Web site at www.mgeups.com or contact your nearest MGE UPS SYSTEMS representative.

Environment

MGE UPS SYSTEMS pays great attention to the environmental impact of its products during the design and manufacture stages and through to the end of its life cycle.

MGE UPS SYSTEMS products comply with the strictest regulations.

They do not contain CFCs or HCFCs.

Recycling of packaging

Packaging has been designed to be recycled. Please make sure it is correctly recycled (in compliance with applicable regulations).

Recycling of products at the end of their life cycle

MGE UPS SYSTEMS undertakes to recycle all recovered products at the end of their life cycle in installations complying with applicable regulations. Please contact our sales office.

See the environment section on our Web site at www.mgeups.com.

Special precautions

If the card or external unit must be stored prior to installation, always store in a dry location.

Storage temperature range: -10ºC to +70ºC.

34003602EN/AB - Page 3

Image 3
Contents Installation manual PowerServicesTM TelPac2 34003602EN/AB Recycling of packaging Special precautionsIntroduction EnvironmentRadio and Telecommunications compatibility ForewordEMC compatibility Federal Communication Commission FCC statementList of countries supported by the modem Modem compatibility and supported countriesPictogram symbols Contents Maintenance Presentation Unpacking and checking the contentsOverview Functions Country Teleservice CentreModem Technical data sheetPower supply RS485 PortIndicator lights Status Green UPS indicator Card version External versionStatus Red CD indicator Card version External version Installation ProcedurePreliminary check Various installation types Fitting the warning label RecommendationsGalaxy PW MGE Attention Onduleur sous TeleserviceUPS with Jbus Setting up the RS485 linkSingle-unit type installation GeneralImpedance matching and bias settings = Shielding Configuring the shielding terminalFor Comet Configuring the RS485 card for CometConfiguring the Rauz card for Galaxy Connection Installing the PowerServices TelPac cardConnections Comet S31 7.5/10KVAComet S31 15/20KVA Open the doors giving access to Galaxy view with doors open and protective panels in place PowerServices TelPac card 2 inputs Connecting contact type inputs5V B PowerServices TelPac external unit 2 inputs + 4 extensionsMaintenance Cable diagramsComet link cable ref