MGE UPS Systems 100 installation manual Recommendations, Fitting the warning label

2. Installation

2.4 Recommendations

To ensure continuous remote monitoring of your equipment, the unit must remain permanently connected to the telephone network once installed. Regular checks should be made to ensure that it is working properly via the indicator light on the front of the card or external unit (see section 1.5 "Indicator lights").

When working on your installation, always disconnect the telephone line to avoid any unwanted alarms being sent to the Teleservice centre.

2.5 Fitting the warning label

A set of yellow warning labels is provided in the PowerServices TelPac kit.

This label is designed to warn MGE UPS SYSTEMS field technicians that the equipment is being remotely monitored and that work on equipment connected to PowerServices TelPac must only be performed once the telephone line has been disconnected.

In the case of "Single-unit" remote monitoring (one product), the label is placed on this unit, near the control buttons (see illustration).

In the case of "Multi-unit" remote monitoring (several products), the labels are placed near the control buttons on each product .

Page 16 - 34003602EN/AB