Conair Portable Chillers Series 1Water-Cooled (W1) and Air-Cooled Models (A1) withTIC Control

4 Press the Menu button.

SP displays, flashing alternately with the cur- rent setpoint temperature.

5 Use the Up/Down arrows to change

the setpoint temperature. Each time you press an arrow, the displayed number changes one unit.

6 Press Enter button.

The screen displays STBY and the new number.

7 Press Enter button and hold

for 3 at least seconds until FOP displays on the screen.

8 Apply a load to the Chiller.

9 Use the Up/Down arrows to scroll until ATUN displays on the screen.

10 Press the Enter/Mode button once.

The screen flashes ATUN. When auto tuning is done the screen displays STBY.

11 Press Enter button and hold

for 3 at least seconds until FOP displays on the screen.

12 Use the Up/Down arrows to scroll to NOR on the screen.

13 Press Enter button.

Initiating Auto Tune is complete.

CHANGING

AUTO TUNE

MODE

CONT’D

To return to the To Process Temperature screen from any other screen, press and hold the button for at least 5 seconds until the temperature displays.

UGH016/0500 Series 1 Portable Chillers, TIC Control OPERATION 4-7