Conair UGH016/0500 manual Checking Reservoir Level, 5-10, WARNING Electrical hazard

CHECKING

RESERVOIR

LEVEL

WARNING: Electrical hazard

Before performing any work on this item, dis- connect and lock out electrical power sources to prevent injury from unexpected energization or startup.

Check the fluid level in the reservoir. The meniscus in the sight glass on the back of the chiller should be in line with the mark on the sight glass.

To manually fill the reservoir:

1	Disconnect and lockout power to the chiller.
2	Locate the fill port on the back of the chiller.
3	Refill the reservoir.
	Monitor the level using the water level gauge on the back
	of the chiller. Because the Portable Chiller can use either
	pure water or a glycol solution, make sure your are
	adding the correct fluid for your application.

Fill port

Fill/Drain valve

Water level gauge

If you have the optional make-up water level float switch, it will automatically control the fluid level.

5-10 MAINTENANCE Series 1 Portable Chillers, TIC Control UGH016/0500