Conair Portable Chillers Series 1Water-Cooled (W1) and Air-Cooled Models (A1) withTIC Control

The Conair A1 and W1 Portable Chillers can be used any- where a reliable source of process cooling water - with stable temperature control - is required.

These portable chillers are available for cooling injection molding, blow molding, thermoforming, extrusion, air com- pressors, metal plating, anodizing, degreasing, heatset/web offset printing presses, and dryer after-coolers.

Roll the air-cooled condenser models next to the heat source connect it and plug it in. They can operate almost anywhere.

The water-cooled condenser models require a source of con- denser water. Normally used in conjunction with a recirculat- ing evaporative cooling tower system, the units have slightly better operating energy efficiencies.

TYPICAL

APPLICATIONS

Conair Series 1 Portable Chillers are designed to provide	LIMITATIONS
chilled water for industrial applications requiring 24-hour-a-
day performance. Units are self-contained and easy to install
and maintain. Choose the Conair Series 1 Portable Chillers
based on the cooling load and the capacity of the unit. Pick
your Conair Series 1 Portable Chillers based on:
● Cooling load
Choose a portable chiller that has 20% more capacity than
the process load.
● Location

Choose a water-cooled model if the unit will be located in an air-conditioned area. Choose the water-cooled model if a source of condenser water is readily available (i.e. cool- ing tower water). Do not locate the portable chiller out- side unless the unit is specially modified.

●Temperature

The portable chiller needs to provide a cooling tempera- ture less than 70 °F (21°C).

Use this information as a general guide. Consult your Conair representative for assistance when choosing a Conair Portable Chiller.

UGH016/0500 Series 1 Portable Chillers, TIC Control DESCRIPTION 2-3