Overview – The Display
Basic display navigation principles
All illustrated display screens are examples only!
Note
On the display, press ESC until you get to the Overview Screen, which provides you with basic system status information.
Press UP, DOWN arrows to navigate with the selector arrow and view all
Chrg 100% 
Load 000% 
230Vin 000Vout 50Hz Runtime: 0hr 0m
Overview Screen
Press ENTER to open the Main Menu screen. From here, you command, configure, and monitor the system.
Control | Logging |
Status | Display |
Setup | Diags |
| Help |
Main Menu
Control functions
From the Control Screen on the Main Menu, you can select the following functions:
1.Turn Load OFF/ON
2.Switch the UPS into Bypass/out of Bypass
Warning
Control | Logging |
Status | Display |
Setup | Diags |
| Help |
Main Menu
Disconnecting the UPS output to the load does NOT
Switch load OFF (disconnect the UPS output to the load equipment).
1.From the Main Menu, select Control and press ENTER
2.Use UP/DOWN key to navigate to Turn Load OFF, and press ENTER
3.Select YES, Turn Load OFF
8 |