Initial Inspection
Inspection
Inspect the UPS upon receipt. Notify the carrier and dealer if there is damage. The packaging is recyclable; save it for reuse or dispose of it properly.
Unpacking
Move the UPS, in its shipping package, as close to the desired location as possible. Then follow these instructions:
Use scissors or a knife to cut the plastic straps and open the package.
Unpack all visible foam pieces and the wooden unloading ramp.
Remove the carton liner.
Pull out the two (2) metal bars and set aside.
Insert the metal pallet brackets into the holes on the unloading ramp.
Have two (2) people, standing on either side of the
Refer to this User’s Manual for safety information and installation instructions.
Lift off the cardboard box that covers the top and sides of the package. A wooden pallet forms the bottom of the box.
Unscrew the
Open the literature kit and locate the two (2) metal pallet brackets.
Attach the unloading ramp to the pallet.
| 2 |