American Power Conversion SURT15000, 20000 VA user manual Environmental Specifications

Page 6

Specifications

Environmental Specifications

	Temperature	32° to 104° F (0° to 40° C)	This unit is intended for indoor use only.
	Operating	32° to 104° F (0° to 40° C)	Select a location sturdy enough to handle
	Storage	5° to 113° F (-15°to 45° C) charge the UPS battery every	the weight.
		six months	Do not operate the UPS where there is
		86° to 158° F (30° to 70° C) charge the UPS battery every	Do not operate the UPS where there is
		86° to 158° F (30° to 70° C) charge the UPS battery every	excessive dust or the temperature or
		three months	excessive dust or the temperature or
		three months	humidity are outside the specified limits.
			humidity are outside the specified limits.
	Maximum		This unit has front to rear airflow. Allow
	Elevation	10,000 ft (3,000 m)	adequate space for proper ventilation.
	Operating	10,000 ft (3,000 m)	Environmental factors impact battery life.
	Storage	50,000 ft (15,240 m)	Environmental factors impact battery life.
	Storage	50,000 ft (15,240 m)	High temperatures, poor utility power, and
			High temperatures, poor utility power, and
	Humidity	0 to 95% relative humidity, non-condensing	frequent, short duration discharges will
	Humidity	0 to 95% relative humidity, non-condensing	shorten battery life.
			shorten battery life.

	Physical Specifications

	Weight (unpacked)

	UPS	145 lbs (66 kg)

Dimensions
		482 mm
		19 in
		465 mm
		18.3 in
		432 mm	773 mm
		17 in	30.4 in
263 mm 10.4 in	102 mm	4 in

2	Smart-UPS RT 15000/20000 VA 230 Vac UXI/UXICH Tower User Manual

Image 6

Contents UXI/UXICH Page Contents Page Unpack package contents About this UPSSpecifications Environmental SpecificationsInstallation Install PowerViewConnect PowerView Route ethernet cable and install top cover and bezelsFront panel access routing ethernet cable under top cover Accessories Optional accessoriesInstall input and output wiring trays in UPS rear panel Wiring Specifications Adhere to national and local electrical codes when wiringInput wiring options Input/Output Jumper ConfigurationsSingle phase input, single phase output, single feed Single phase input, single phase output, dual feedThree phase input, single phase output, dual feed Three phase input, single phase output, single feedThree phase input, three phase output, single feed Three phase input, three phase output, dual feedOutput wiring options L3 L2 L1 OSJQualified electrician should perform the installation Battery SafetyAPC battery solution Servicing of external batteriesThird party battery solution Each battery system must have identical Amp-hrsOperation PowerView Interface DisplayBattery operation Normal operationNavigating menu screens Main Menu ScreenMenu Tree Navigating sub menu screensSub menu screens SystemView Log Connect power to UPS and load Connect load to UPSCommunication Ports Emergency Power Off EPO EPO ConnectorInput/Output Jumper Configurations Page Refer to Contact Information in this Option 2 Correct bypass input Service and Transport Warranty claims Regulatory Agency Approvals Models