Coda Cold-Mount Laminator operation manual Coating Boards with the Heavy Duty Roll Feed

Page 23

Coating Boards with the Heavy Duty Roll Feed

Set the roller gap (1/16” less than board thickness) as defined in previous sections for setting roller gap, alignment and pressure. Drape the adhesive over the rollers then push the board in between the rollers causing the adhesive to go with it.

Figure 42

Feed the board through until the trailing edge is about in the middle of the feed tray, then stop the laminator and butt the next board to be coated up against it. You are now ready to feed boards and coat continuously.

You can use a leader board to begin this process if you prefer.

Figure 43

Coda, Inc. • 30 Industrial Avenue • Mahwah, NJ 07430 Phone: 201-825-7400 Fax: 201-825-8133

Email: sales@codamount.com	www.codamount.com
Cold-Mount ® is a registered trademark of Coda Inc.
Cold-Mount® Laminator Operation Manual	January 2006

Image 23

Contents Coda Cold-Mount Laminator Operation Guide Instructions Cold-Mount Laminator Operation Guide IndexLaminator Set-Up Laminator Set-Up Location and Function of Controls Setting the Spring Pressure Adjusting the Rollers for Even Pressure Roller Alignment Procedure Setting the Roller Gap Basic Cold-MountProcedure Basic Cold-MountProcedure Congratulations you have successfully mounted a print Laminating a Print with a Sheeted Laminate Laminating a Print with a Sheeted Laminate Laminating a Print with a Sheeted Laminate Laminating a Print with a Sheeted Laminate Optional Heavy Duty Roll Feed Heavy Duty Roll FeedTo attach the Heavy Duty Roll Feed to the Laminator Heavy Duty Roll Feed AssemblyShows the Heavy Duty Roll Feed assembled to a 26 Laminator Laminating with the Heavy Duty Roll Feed Laminating with the Heavy Duty Roll Feed Coating Boards with the Heavy Duty Roll Feed Coating Boards with the Heavy Duty Roll Feed Coating Boards with the Heavy Duty Roll Feed Coda Cold-Mount System Coda Cold Pressure Sensitive Laminates Coda Mounting Adhesives Coda Pre-Coated Boards Coda Accessories