Coda Cold-Mount Laminator operation manual Location and Function of Controls

Page 5

Location and Function of Controls

?

?

Figure 4

Power ON-OFF

Manual Mode – When power is applied and Reset has been pressed the machine will run at the speed set by the Speed Dial.

?

?

?

?

Foot Mode - When power is applied and Reset has been pressed the machine will run at the speed set by the Speed Dial whenever the footswitch is depressed.

Reset – Machine will stop when the electric eye is interrupted. The Reset must be pressed to re-activate the machine.

Emergency Stop – This button is located on top of the control box. Rotate and pull up to allow the machine to run. Push down for emergency STOP.

SPEED – Controls the speed of the machine and has an integrated ON-OFF position. Note: The motor starts running when the speed is at about 2 on the Speed Dial.

Coda, Inc. • 30 Industrial Avenue • Mahwah, NJ 07430 Phone: 201-825-7400 Fax: 201-825-8133

Email: sales@codamount.com	www.codamount.com
Cold-Mount ® is a registered trademark of Coda Inc.
Cold-Mount® Laminator Operation Manual	January 2006

Image 5

Contents Coda Cold-Mount Laminator Operation Guide Instructions Cold-Mount Laminator Operation Guide IndexLaminator Set-Up Laminator Set-Up Location and Function of Controls Setting the Spring Pressure Adjusting the Rollers for Even Pressure Roller Alignment Procedure Setting the Roller Gap Basic Cold-MountProcedure Basic Cold-MountProcedure Congratulations you have successfully mounted a print Laminating a Print with a Sheeted Laminate Laminating a Print with a Sheeted Laminate Laminating a Print with a Sheeted Laminate Laminating a Print with a Sheeted Laminate Optional Heavy Duty Roll Feed Heavy Duty Roll FeedTo attach the Heavy Duty Roll Feed to the Laminator Heavy Duty Roll Feed AssemblyShows the Heavy Duty Roll Feed assembled to a 26 Laminator Laminating with the Heavy Duty Roll Feed Laminating with the Heavy Duty Roll Feed Coating Boards with the Heavy Duty Roll Feed Coating Boards with the Heavy Duty Roll Feed Coating Boards with the Heavy Duty Roll Feed Coda Cold-Mount System Coda Cold Pressure Sensitive Laminates Coda Mounting Adhesives Coda Pre-Coated Boards Coda Accessories