Coda Cold-Mount Laminator operation manual Setting the Spring Pressure

Page 6

Setting the Spring Pressure

The roller pressure is a measure of the amount of force being applied to the material by the rollers. It can be adjusted in two ways, by the amount of pre-load on the pressure springs and/or by the amount of gap. Place the pressure adjustment tool into the slots and turn to adjust the pressure spring.

To adjust the amount of starting pressure applied by the pressure springs, insert the adjusting tool that came with your press into the slots in the castle nut. To increase the amount of pressure, rotate the nut clockwise so the spring compresses. To decrease the amount of pressure, rotate the nut counter-clockwise so the spring decompresses.

Figure 5

The pressure indicator is located on the side post assembly and is provided as a visual indication of the amount of pressure. The typical setting is 1-1/8” aligned with the top edge of the indicator. Be sure to set both sides to the same setting.

Figure 6

Coda, Inc. • 30 Industrial Avenue • Mahwah, NJ 07430 Phone: 201-825-7400 Fax: 201-825-8133

Email: sales@codamount.com

www.codamount.com

Cold-Mount ® is a registered trademark of Coda Inc.

Cold-Mount® Laminator Operation Manual

January 2006

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Coda Cold-Mount Laminator Operation Guide Cold-Mount Laminator Operation Guide Index InstructionsLaminator Set-Up Laminator Set-Up Location and Function of Controls Setting the Spring Pressure Adjusting the Rollers for Even Pressure Roller Alignment Procedure Setting the Roller Gap Basic Cold-MountProcedure Basic Cold-MountProcedure Congratulations you have successfully mounted a print Laminating a Print with a Sheeted Laminate Laminating a Print with a Sheeted Laminate Laminating a Print with a Sheeted Laminate Laminating a Print with a Sheeted Laminate Heavy Duty Roll Feed Optional Heavy Duty Roll FeedHeavy Duty Roll Feed Assembly To attach the Heavy Duty Roll Feed to the LaminatorShows the Heavy Duty Roll Feed assembled to a 26 Laminator Laminating with the Heavy Duty Roll Feed Laminating with the Heavy Duty Roll Feed Coating Boards with the Heavy Duty Roll Feed Coating Boards with the Heavy Duty Roll Feed Coating Boards with the Heavy Duty Roll Feed Coda Cold-Mount System Coda Cold Pressure Sensitive Laminates Coda Mounting Adhesives Coda Pre-Coated Boards Coda Accessories
Top Page Image Contents