Coda Cold-Mount Laminator operation manual Basic Cold-MountProcedure

Page 10

Basic Cold-Mount®Procedure

Using an adhesive coated board, peel the release liner back about

1-½” from the top of the substrate, then fold and put a sharp crease in the release liner.

Figure 13

Line the print up with the edges of the substrate. Lightly tack print along top ½” of substrate, working from the center out or from one side to the other, so as not to trap air. (Do NOT press along the crease in the release liner.)

Figure 14

Insert the tacked end of print about ½” into the laminator. (Do not catch release liner in the laminator.) As you start the laminator, hold the print at a 45 degree angle above the top roller.

	Figure 15
Coda, Inc. • 30 Industrial Avenue • Mahwah, NJ 07430 Phone: 201-825-7400 Fax: 201-825-8133
Email: sales@codamount.com	www.codamount.com
Cold-Mount ® is a registered trademark of Coda Inc.
Cold-Mount® Laminator Operation Manual	January 2006

Image 10

Contents Coda Cold-Mount Laminator Operation Guide Cold-Mount Laminator Operation Guide Index InstructionsLaminator Set-Up Laminator Set-Up Location and Function of Controls Setting the Spring Pressure Adjusting the Rollers for Even Pressure Roller Alignment Procedure Setting the Roller Gap Basic Cold-MountProcedure Basic Cold-MountProcedure Congratulations you have successfully mounted a print Laminating a Print with a Sheeted Laminate Laminating a Print with a Sheeted Laminate Laminating a Print with a Sheeted Laminate Laminating a Print with a Sheeted Laminate Heavy Duty Roll Feed Optional Heavy Duty Roll FeedHeavy Duty Roll Feed Assembly To attach the Heavy Duty Roll Feed to the LaminatorShows the Heavy Duty Roll Feed assembled to a 26 Laminator Laminating with the Heavy Duty Roll Feed Laminating with the Heavy Duty Roll Feed Coating Boards with the Heavy Duty Roll Feed Coating Boards with the Heavy Duty Roll Feed Coating Boards with the Heavy Duty Roll Feed Coda Cold-Mount System Coda Cold Pressure Sensitive Laminates Coda Mounting Adhesives Coda Pre-Coated Boards Coda Accessories