Coda Cold-Mount Laminator operation manual Laminating a Print with a Sheeted Laminate

Page 15

Laminating a Print with a Sheeted Laminate (continued)

Do not peel the release liner all the way off and let the laminate fall onto the print as this will trap air and cause bubbles.

Figure 24

The laminate should make first contact with the print at the same point that the top roller contacts the print. This will insure even application of the laminate to the print.

Figure 25

Coda, Inc. • 30 Industrial Avenue • Mahwah, NJ 07430 Phone: 201-825-7400 Fax: 201-825-8133

Email: sales@codamount.com	www.codamount.com
Cold-Mount ® is a registered trademark of Coda Inc.
Cold-Mount® Laminator Operation Manual	January 2006

Image 15

Contents Coda Cold-Mount Laminator Operation Guide Instructions Cold-Mount Laminator Operation Guide IndexLaminator Set-Up Laminator Set-Up Location and Function of Controls Setting the Spring Pressure Adjusting the Rollers for Even Pressure Roller Alignment Procedure Setting the Roller Gap Basic Cold-MountProcedure Basic Cold-MountProcedure Congratulations you have successfully mounted a print Laminating a Print with a Sheeted Laminate Laminating a Print with a Sheeted Laminate Laminating a Print with a Sheeted Laminate Laminating a Print with a Sheeted Laminate Optional Heavy Duty Roll Feed Heavy Duty Roll FeedTo attach the Heavy Duty Roll Feed to the Laminator Heavy Duty Roll Feed AssemblyShows the Heavy Duty Roll Feed assembled to a 26 Laminator Laminating with the Heavy Duty Roll Feed Laminating with the Heavy Duty Roll Feed Coating Boards with the Heavy Duty Roll Feed Coating Boards with the Heavy Duty Roll Feed Coating Boards with the Heavy Duty Roll Feed Coda Cold-Mount System Coda Cold Pressure Sensitive Laminates Coda Mounting Adhesives Coda Pre-Coated Boards Coda Accessories